1. Home
  2. Previous Year Papers
  3. RRB ALP
  4. 2025
  5. 6 May 2025
Railway Recruitment Boards (RRB)

RRB ALP Electrician Question Paper – 6 May 2025, 9:30 AM shift (with Answers)

All 175 questions of the 6 May 2025 paper (9:30 AM - 12:00 PM), with all the options and the correct answer. 6 of them carry a figure or a formula, shown as in the paper. Read it here, or take the same paper as a timed test and see your score and rank.

Disclaimer: We do not own this question paper or its questions. They belong to the government body that conducted the examination. The paper is shared here in good faith, free of cost, only to help students prepare better.

175Questions
150 minDuration
+1 / −1/3Marking
6 May 2025Exam date
  1. Q.1PART-A
    Simran rides a distance of 60 m in one minute and then returns along the same straight path. The average velocity of her ride is _____.
    1. 0 m/s
    2. 60 m/s
    3. 1 m/s
    4. 2 m/s
    Show answer

    Correct answer: option1 — 0 m/s

  2. Q.2PART-A
    Jaspreet deposited a sum of ₹12,800 at 5% rate of interest per annum, compounded annually. The total amount (in ₹) received by Jaspreet after 2 years will be:
    1. 14,112
    2. 14,512
    3. 13,997
    4. 14,442
    Show answer

    Correct answer: option1 — 14,112

  3. Q.3PART-A
    Which of the following correctly describes the role of DNS (Domain Name System) in internet architecture?
    1. DNS translates IP addresses into domain names to make them easier to remember.
    2. DNS secures the data transmitted over the internet by encrypting it.
    3. DNS routes data packets to their destination across the internet.
    4. DNS translates domain names into IP addresses to allow browsers to locate web servers.
    Show answer

    Correct answer: option4 — DNS translates domain names into IP addresses to allow browsers to locate web servers.

  4. Q.4PART-A
    Which key combination is commonly used for copying text in many text editing applications in Windows?
    1. Ctrl+S
    2. Ctrl+V
    3. Tab
    4. Ctrl+C
    Show answer

    Correct answer: option4 — Ctrl+C

  5. Q.5PART-A
    In a certain code language, 'A × B' means ‘A is the son of B’, 'A − B' means ‘A is the brother of B’, 'A + B' means ‘A is the wife of B’ and 'A % B' means ‘A is the father of B’. How is M related to T if ‘M × N % P + S − T’?
    1. Brother's wife's brother
    2. Brother's wife's father's father
    3. Brother's wife's father
    4. Brother's wife's father's brother
    Show answer

    Correct answer: option1 — Brother's wife's brother

  6. Q.6PART-A
    What is the immediate action to take when a fire breaks out in a workplace?
    1. Raise the alarm and evacuate the area
    2. Ignore the fire and continue working
    3. Gather near the fire to observe the situation
    4. Try to put it out using water without knowing the fire type
    Show answer

    Correct answer: option1 — Raise the alarm and evacuate the area

  7. Q.7PART-A
    Read the given statements and conclusions carefully. Assuming that the information given in the statements is true, even if it appears to be at variance with commonly known facts, decide which of the given conclusion(s) logically follow(s) from the statements. Statements: Some ships are boats. All boats are submarines. Some submarines are yachts Conclusions: (I) Some yachts are boats. (II) Some yachts are ships.
    1. Both conclusions (I) and (II) follow.
    2. Only conclusion (II) follows.
    3. Only conclusion (I) follows.
    4. Neither conclusion (I) nor (II) follows.
    Show answer

    Correct answer: option4 — Neither conclusion (I) nor (II) follows.

  8. Q.8PART-A
    In Engineering Drawing, which of the following is the correct definition of the term 'dimension'.
    1. A numerical value expressed in an appropriate unit of measurement
    2. A line that is drawn to make a section evident
    3. The thickness of the line of a letter
    4. A continuous thick or wide line along which the prints are trimmed
    Show answer

    Correct answer: option1 — A numerical value expressed in an appropriate unit of measurement

  9. Q.9PART-A
    Which of the following options is correct when two objects at the same temperature are kept in contact with each other?
    1. No heat is transferred.
    2. Heat is transferred from object 2 to object 1.
    3. Both objects transfer heat to each other.
    4. Heat is transferred from object 1 to object 2.
    Show answer

    Correct answer: option1 — No heat is transferred.

  10. Q.10PART-A
    1. 15 : 16
    2. 14 : 15
    3. 16 : 15
    4. 15 : 14
    Show answer

    Correct answer: option3 — 16 : 15

  11. Q.11PART-A
    What should come in place of the question mark (?) in the given series? 17 29 41 59 77 101 125 ?
    1. 155
    2. 161
    3. 175
    4. 149
    Show answer

    Correct answer: option1 — 155

  12. Q.12PART-A
    Which of the following groups represents conductors of heat?
    1. Paper, copper, plastic
    2. Aluminium, silver, copper
    3. Wood, paper, silver
    4. Aluminium, plastic, wood
    Show answer

    Correct answer: option2 — Aluminium, silver, copper

  13. Q.13PART-A
    Refer to the following letter, number and symbol series and answer the question that follows. Counting to be done from left to right only. (Left) K A T & 4 @ Y # 6 K & 2 R % 7 D 3 5 E * S (Right) How many such symbols are there which are immediately preceded by a number and also immediately followed by a letter?
    1. Four
    2. Two
    3. One
    4. Three
    Show answer

    Correct answer: option3 — One

  14. Q.14PART-A
    An object of mass m is made to fall freely from a height h. As the object continues to fall, what will happen to its energy?
    1. The potential energy would increase while the kinetic energy would decrease.
    2. The potential energy would decrease while the kinetic energy would increase.
    3. The kinetic energy and potential energy will not change.
    4. The potential energy and kinetic energy will both increase.
    Show answer

    Correct answer: option2 — The potential energy would decrease while the kinetic energy would increase.

  15. Q.15PART-A
    Which of the following is an application of the 5S concept in a workshop?
    1. Keeping tools and materials organised for easy access
    2. Using extra tools without proper storage
    3. Removing safety protocols to improve efficiency
    4. Increasing the number of safety supervisors
    Show answer

    Correct answer: option1 — Keeping tools and materials organised for easy access

  16. Q.16PART-A
    In a business, Tushar invests in ₹10,000 and Salil invests in ₹20,000. Tushar received 10% of the profit for managing the business and the rest of the profit is divided in the ratio of their capitals. Find Tushar's share of the profit (in ₹) in a profit of ₹14,400.
    1. 5,760
    2. 5,610
    3. 5,910
    4. 5,510
    Show answer

    Correct answer: option1 — 5,760

  17. Q.17PART-A
    Which of the following is an INCORRECT formula for power?
    1. I2R
    2. V2/R
    3. VI
    4. I2Rt
    Show answer

    Correct answer: option4 — I2Rt

  18. Q.18PART-A
    Mangal starts from Point A and walks 14 m towards north. He takes a right turn, walks 9 m and then takes a right turn, walks 37 m, reaches Point B and stops. Jayanti starts from Point Z which is 15 m towards the east of Point B. She walks 11 m towards east, takes a left turn, walks 42 m, turns left and walks 63 m, turns left and walks 19 m and stops at Point Y. What is the shortest distance between Point A and Point Y? (All turns are 90 degree turns only.)
    1. 31 m
    2. 26 m
    3. 28 m
    4. 25 m
    Show answer

    Correct answer: option3 — 28 m

  19. Q.19PART-A
    Pihu starts her car at 9 a.m. to reach her office, which is 20 km away. She covers the first 10 km in 30 minutes and reaches her office at 10 a.m. Pihu’s motion is ________.
    1. non-uniform motion
    2. retarded motion
    3. accelerated motion
    4. uniform motion
    Show answer

    Correct answer: option4 — uniform motion

  20. Q.20PART-A
    Which of the following is the temperature range in a clinical thermometer?
    1. 31°C to 44°C
    2. 30°C to 43°C
    3. 10°C to 45°C
    4. 35°C to 42°C
    Show answer

    Correct answer: option4 — 35°C to 42°C

  21. Q.21PART-A
    The energy possessed by an object by virtue of its motion is known as ________.
    1. light energy
    2. potential energy
    3. kinetic energy
    4. heat energy
    Show answer

    Correct answer: option3 — kinetic energy

  22. Q.22PART-A
    The taxi charges in a city consist of a fixed charge together with the charge per kilometre for the distance covered. For a distance of 35 km, the charge paid is ₹375 and for a distance of 48 km, the charge paid is ₹427. Find the fixed charges and the charge per km (in ₹), respectively.
    1. 235 and 4
    2. 227 and 5
    3. 220 and 6
    4. 275 and 3
    Show answer

    Correct answer: option1 — 235 and 4

  23. Q.23PART-A
    The heat developed in a 5 ohm resistor in 2 minutes when a 2A current passes through it is ________.
    1. 1000 J
    2. 40 J
    3. 2400 J
    4. 500 J
    Show answer

    Correct answer: option3 — 2400 J

  24. Q.24PART-A
    Select the pair that follows the same pattern as the one followed by the two sets of pairs given below. Both pairs follow the same pattern. BSR : GQW LOB : QMG
    1. QGT : TDW
    2. KRW : NPZ
    3. HVD : LTH
    4. RWH : WUM
    Show answer

    Correct answer: option4 — RWH : WUM

  25. Q.25PART-A
    What is the main advantage of using solar energy over fossil fuels?
    1. Greenhouse gas emission is higher when solar energy is used.
    2. Solar energy extraction requires high operational cost when compared to fossil fuels.
    3. Solar energy is abundantly available and renewable in nature.
    4. Solar energy requires mining and extraction, whereas fossil fuels are free of cost.
    Show answer

    Correct answer: option3 — Solar energy is abundantly available and renewable in nature.

  26. Q.26PART-A
    Match the following. (A) Continuous thick lines (P) Projection lines (B) Hidden lines (Q) Principal lines (C) Outlines (R) Dotted lines (D) Extension lines (S) Object lines
    1. A-S, B-R, C-P, D-Q
    2. A-S, B-R, C-Q, D-P
    3. A-R, B-S, C-Q, D-P
    4. A-P, B-R, C-Q, D-S
    Show answer

    Correct answer: option2 — A-S, B-R, C-Q, D-P

  27. Q.27PART-A
    What should come in place of the question mark (?) in the given series? 87 118 149 ? 211 242
    1. 199
    2. 188
    3. 171
    4. 180
    Show answer

    Correct answer: option4 — 180

  28. Q.28PART-A
    The HCF of two numbers is 62, and the other two factors of the LCM of these factors are 7 and 9. Which of the options given below can be a possible value of the smaller of the two numbers?
    1. 434
    2. 431
    3. 432
    4. 433
    Show answer

    Correct answer: option1 — 434

  29. Q.29PART-A
    How fast should a cat of mass 15 kg run in order to have a kinetic energy of 120 J?
    1. 40 m/s
    2. 16 m/s
    3. 0.16 m/s
    4. 4 m/s
    Show answer

    Correct answer: option4 — 4 m/s

  30. Q.30PART-A
    Which of the following features allows the user to quickly find emails received from a specific sender?
    1. Filter
    2. Sort
    3. Archive
    4. Draft
    Show answer

    Correct answer: option2 — Sort

  31. Q.31PART-A
    The floor of a rectangular hall has a perimeter of 220 m. If the cost of painting the four walls at the rate of ₹10 per m2 is ₹11,000, then find the volume of the hall.
    1. 19,250 m3
    2. 19,520 m3
    3. 18,250 m3
    4. 19,200 m3
    Show answer

    Correct answer: option1 — 19,250 m3

  32. Q.32PART-A
    Find the value of 96.86572 × 107.
    1. 9,68,65,720
    2. 0.9686572
    3. 96,86,57,200
    4. 96,86,572
    Show answer

    Correct answer: option3 — 96,86,57,200

  33. Q.33PART-A
    A boy goes to school at a speed of 5 km/hr. He returns at a speed of 14 km/hr. He takes a total of 8 hours for both going to school and returning. The distance (in km) between his home and school is:
    1. 31
    2. 29.5
    3. 28.6
    4. 27
    Show answer

    Correct answer: option2 — 29.5

  34. Q.34PART-A
    If 11.6 : x :: x : 2.9, and x > 0, then find the value of x.
    1. 10.9
    2. 3.1
    3. 5.8
    4. 7.7
    Show answer

    Correct answer: option3 — 5.8

  35. Q.35PART-A
    Based on the English alphabetical order, three of the following four letter-cluster pairs are alike in a certain way and thus form a group. Which letter-cluster pair DOES NOT belong to that group?? (Note: The odd one out is not based on the number of consonants/vowels or their position in the letter-cluster pair)
    1. MF – HJ
    2. DW – YA
    3. SL – NP
    4. WP – RS
    Show answer

    Correct answer: option4 — WP – RS

  36. Q.36PART-A
    How do we find absolute error?
    1. Absolute error = Actual value + observed value
    2. Absolute error = Actual value × observed value
    3. Absolute error = Actual value/observed value
    4. Absolute error = Actual value − observed value
    Show answer

    Correct answer: option4 — Absolute error = Actual value − observed value

  37. Q.37PART-A
    In a certain code language, ‘LOVE’ is coded as ‘8364’ and ‘EARS’ is coded as ‘3517’. What is the code for ‘E’ in the given code language?
    1. 3
    2. 5
    3. 7
    4. 4
    Show answer

    Correct answer: option1 — 3

  38. Q.38PART-A
    The areas of three adjacent faces of a solid cuboid are 162 cm2, 144 cm2 and 50 cm2. What is the volume (in cm3) of the cuboid?
    1. 805
    2. 1365
    3. 1080
    4. 833
    Show answer

    Correct answer: option3 — 1080

  39. Q.39PART-A
    How does turning off unused electrical devices contribute to energy conservation?
    1. By degrading electrical devices
    2. By increasing energy use
    3. By enhancing device performance
    4. By lowering utility bills
    Show answer

    Correct answer: option4 — By lowering utility bills

  40. Q.40PART-A
    Which of the following is a poor conductor of heat?
    1. Aluminium rod
    2. Steel spoon
    3. Copper
    4. Wool
    Show answer

    Correct answer: option4 — Wool

  41. Q.41PART-A
    Select the triad that follows the same pattern as that followed by the two triads given below. Both triads follow the same pattern. JK - LM - NO TU - VW - XY
    1. DE - FB - DF
    2. DE - FG - HI
    3. WE - DF - HI
    4. DE - FG - KL
    Show answer

    Correct answer: option2 — DE - FG - HI

  42. Q.42PART-A
    A is thrice as good a workman as B and together they can finish a piece of work in 12 days. In how many days can A alone finish the work?
    1. 14 days
    2. 16 days
    3. 12 days
    4. 18 days
    Show answer

    Correct answer: option2 — 16 days

  43. Q.43PART-A
    A line in an engineering drawing is the ____________.
    1. one-dimensional figure, which has length but no width
    2. closed curve where all points are the same distance from a fixed centre point
    3. three-dimensional object with length, breadth, and height
    4. dimensionless location in space or on a drawing sheet that has no width, height, or depth
    Show answer

    Correct answer: option1 — one-dimensional figure, which has length but no width

  44. Q.44PART-A
    Based on the English alphabetical order, three of the following four letter-cluster pairs are alike in a certain way and thus form a group. Which letter-cluster pair DOES NOT belong to that group? (Note: The odd one out is not based on the number of consonants/vowels or their position in the letter-cluster pair.)
    1. WE – AU
    2. MU – QL
    3. DL – HB
    4. SA – WQ
    Show answer

    Correct answer: option2 — MU – QL

  45. Q.45PART-A
    What should come in place of the question mark (?) in the given series? UT27, RQ25, NM23, ?
    1. IH29
    2. IG21
    3. JH19
    4. IH21
    Show answer

    Correct answer: option4 — IH21

  46. Q.46PART-A
    Which of the following correctly describes the direction of electric current?
    1. Opposite to the direction of positive charge flow
    2. Opposite to the direction of electron flow
    3. From low potential to high potential
    4. Same as the direction of electron flow
    Show answer

    Correct answer: option2 — Opposite to the direction of electron flow

  47. Q.47PART-A
    In Engineering Drawing, principal lines are drawn to represent __________.
    1. visible edges and surface boundaries of objects
    2. interior or hidden edges
    3. axes of cylindrical, conical or spherical objects
    4. wide lines along which the prints are trimmed
    Show answer

    Correct answer: option1 — visible edges and surface boundaries of objects

  48. Q.48PART-A
    What is the main function of the Transport Layer in the internet architecture?
    1. Data encapsulation
    2. Routing of packets
    3. IP addressing
    4. Reliable data transfer and error correction
    Show answer

    Correct answer: option4 — Reliable data transfer and error correction

  49. Q.49PART-A
    If an electric heater draws a current of 5 A when the potential difference across its terminals is 75 V, what current will it draw when the potential difference is increased to 150 V?
    1. 10 A
    2. 20 A
    3. 30 A
    4. 15 A
    Show answer

    Correct answer: option1 — 10 A

  50. Q.50PART-A
    A fruit seller had some apples. He sells 40% of the apples and now has 900 apples. How many apples did he originally have?
    1. 2250
    2. 1800
    3. 1500
    4. 1350
    Show answer

    Correct answer: option3 — 1500

  51. Q.51PART-A
    Which of the following benefits can be obtained by conducting an energy audit in a commercial building?
    1. Increasing the cost of energy bills
    2. Reduced market value of building
    3. Reduction in price of energy per its unit usage
    4. Identification of opportunities for energy savings
    Show answer

    Correct answer: option4 — Identification of opportunities for energy savings

  52. Q.52PART-A
    Akshay gets 2% increase in his sale amount in the first year and 25% in the second year. With that his present sale is ₹1,42,800. What was his sale (in ₹) two years ago?
    1. 1,12,000
    2. 1,14,240
    3. 1,40,000
    4. 92,000
    Show answer

    Correct answer: option1 — 1,12,000

  53. Q.53PART-A
    If ‘A’ stands for ‘÷’, ‘B’ stands for ‘×’, ‘C’ stands for ‘+’ and ‘D’ stands for ‘−’, then what will come in place of the question mark (?) in the following equation? 35 A 7 C 9 B 3 D 16 = ?
    1. 16
    2. 10
    3. 18
    4. 21
    Show answer

    Correct answer: option1 — 16

  54. Q.54PART-A
    Which of the following is an effective way to prevent electrical accidents in the workplace?
    1. Working on live wires with bare hands
    2. Using water to cool overheated electrical equipment
    3. Ignoring minor electrical faults
    4. Using insulated tools and wearing rubber gloves
    Show answer

    Correct answer: option4 — Using insulated tools and wearing rubber gloves

  55. Q.55PART-A
    Show answer

    Correct answer: option4

  56. Q.56PART-A
    Two containers, one painted black and the other painted white, have been kept in sunlight for one hour in the afternoon. Choose the correct observation.
    1. The black container becomes hotter than the white container.
    2. There is no effect on either container.
    3. Both containers become equally hot.
    4. The white container becomes hotter than the black container.
    Show answer

    Correct answer: option1 — The black container becomes hotter than the white container.

  57. Q.57PART-A
    Which technology operates through an electrochemical process that transforms the energy stored in hydrogen gas (H2) and oxygen into electrical power without combustion?
    1. Hydroelectric power
    2. Wind power
    3. Solar thermal power
    4. Hydrogen fuel cells
    Show answer

    Correct answer: option4 — Hydrogen fuel cells

  58. Q.58PART-A
    In a certain code language, ‘WILD’ is coded as ‘8164’ and ‘DOGS’ is coded as ‘3517’. What is the code for ‘D’ in the given code language?
    1. 4
    2. 3
    3. 1
    4. 5
    Show answer

    Correct answer: option3 — 1

  59. Q.59PART-A
    In a clearance sale of electronic items, an item whose marked price was ₹12,225 is now sold for ₹10,758, d% is the discount percentage on the item. The value of d is:
    1. 11%
    2. 12%
    3. 14%
    4. 13%
    Show answer

    Correct answer: option2 — 12%

  60. Q.60PART-A
    Which of the following steps is essential when configuring a web browser to enhance both security and privacy for a user?
    1. Setting the homepage to a frequently visited website for quick access
    2. Enabling pop-ups for all websites to improve user experience
    3. Configuring the browser to block third-party cookies and enabling HTTPS-only mode
    4. Disabling the browser's cache to improve website loading times
    Show answer

    Correct answer: option3 — Configuring the browser to block third-party cookies and enabling HTTPS-only mode

  61. Q.61PART-A
    Find the value of x2 + y2, given that, x = 7 + √1, y = 7 − √​1​.
    1. 100
    2. 56
    3. 69
    4. 98
    Show answer

    Correct answer: option1 — 100

  62. Q.62PART-A
    The median of the data 2, 6, 4, 8, 1, 2, 5, 8, 9, 10, 12, 9, 7, 8, 3, 1, 0, 9, 2, 5 is ______.
    1. 6.5
    2. 5.5
    3. 6
    4. 5
    Show answer

    Correct answer: option2 — 5.5

  63. Q.63PART-A
    A can complete a piece of work in 18 days. B can complete it in 14 days. With the assistance of C, they completed the work in 7 days. C alone can complete it in ______________ days.
    1. 36
    2. 42
    3. 63
    4. 64
    Show answer

    Correct answer: option3 — 63

  64. Q.64PART-A
    Match the following, according to lettering and numbering (uppercase lettering) as per BIS SP: 46-2003. Width (W) Capital letters (A) 5 (I) W (B) 6 (II) A, M, Q, V, X, Y (C) 7 (III) B, D, G, H, K, N, O, P, R, S, T, U and Z (D) 9 (IV) C, E, F, L
    1. A-(I), B-(III), C-(II), D-(IV)
    2. A-(IV), B-(III), C-(II), D-(I)
    3. A-(IV), B-(III), C-(I), D-(II)
    4. A-(IV), B-(II), C-(III), D-(I)
    Show answer

    Correct answer: option2 — A-(IV), B-(III), C-(II), D-(I)

  65. Q.65PART-A
    Two sets of numbers are given below. In each set of numbers, certain mathematical operation(s) on the first number results in the second number. Similarly, certain mathematical operation(s) on the second number results in the third number and so on. Which of the given options follows the same set of operations as in the given sets? (NOTE: Operations should be performed on the whole numbers, without breaking down the numbers into their constituent digits. E.g. 13 – Operations on 13 such as adding/subtracting/multiplying to 13 can be performed. Breaking down 13 into 1 and 3 and then performing mathematical operations on 1 and 3 is not allowed.) 24 – 48 – 108 – 36; 18 – 36 – 96 – 32
    1. 82 – 139 – 234 – 78
    2. 53 – 106 – 166 – 55
    3. 48 – 96 – 156 – 52
    4. 132 – 264 – 444 – 138
    Show answer

    Correct answer: option3 — 48 – 96 – 156 – 52

  66. Q.66PART-A
    Which term describes the maximum amount of solar energy that a photovoltaic (PV) system can convert into electricity under standard test conditions?
    1. Effective capacity
    2. Rated capacity
    3. Peak load
    4. Nameplate capacity
    Show answer

    Correct answer: option4 — Nameplate capacity

  67. Q.67PART-A
    Calculate the energy possessed by an object of mass 10 kg when it is raised to a height of 5 m from the ground. Given: g = 9.8 m s-2.
    1. 500 J
    2. 400 J
    3. 450 J
    4. 490 J
    Show answer

    Correct answer: option4 — 490 J

  68. Q.68PART-A
    What should come in place of the question mark (?) in the given alpha-numeric series? 2M, 5O, 10R, 13T, 18W, 21Y, ?
    1. 24B
    2. 26A
    3. 26C
    4. 26B
    Show answer

    Correct answer: option4 — 26B

  69. Q.69PART-A
    What is the amount of work done in moving a charge of 6 C from a point with a potential of 120 V to a point with a potential of 140 V?
    1. 3.33 J
    2. 120 J
    3. 840 J
    4. 720 J
    Show answer

    Correct answer: option2 — 120 J

  70. Q.70PART-A
    In a certain code language, ‘BORE’ is coded as ‘8624’ and ‘TABS’ is coded as ‘3217’. What is the code for ‘B’ in the given code language?
    1. 8
    2. 7
    3. 1
    4. 2
    Show answer

    Correct answer: option4 — 2

  71. Q.71PART-A
    Alloys are preferred over pure metals in electrical heating devices:
    1. because the elasticity of an alloy is higher than that of its constituent metals.
    2. because alloys oxidise (burn) readily at high temperatures.
    3. because the resistivity of an alloy is generally higher than its constituent metals.
    4. because the resistivity of an alloy is lower than that of its constituent metals.
    Show answer

    Correct answer: option3 — because the resistivity of an alloy is generally higher than its constituent metals.

  72. Q.72PART-A
    Each of I, J, K, L, U, V and W has an exam on a different day of a week starting from Monday and ending on Sunday of the same week.J has the exam on Friday. Only two people have the exam between V and J. Only four people have the exam between L and V. U has the exam immediately after W. K does not have the exam on Monday.How many people have the exam before K and after I?
    1. Three
    2. One
    3. Two
    4. Four
    Show answer

    Correct answer: option4 — Four

  73. Q.73PART-A
    Seema is twice as old as Alka. If nine years is subtracted from Alka’s age and six years is added to Seema’s age, then Seema will be four times Alka’s age. How old was Alka three years ago?
    1. 18 years
    2. 16 years
    3. 20 years
    4. 21 years
    Show answer

    Correct answer: option1 — 18 years

  74. Q.74PART-A
    Two trains of lengths 155 m and 160 m are running at speeds of 74 km/hr and 52 km/hr, respectively, on parallel tracks in opposite directions. In how many seconds will they pass each other?
    1. 18 seconds
    2. 7 seconds
    3. 9 seconds
    4. 14 seconds
    Show answer

    Correct answer: option3 — 9 seconds

  75. Q.75PART-A
    Show answer

    Correct answer: option2

  76. Q.76PART-A
    In this question, a statement is given followed by two courses of action, numbered I and II. You must assume everything in the statement to be true, and on the basis of the information given in the statement, decide which of the given courses of action logically follow(s) for pursuing. Statement: A major fire broke out this afternoon in a mall in Jaipur, causing several casualties amongst the people present inside. Courses of Action: The police must check to see if the fire safety regulations were followed by the mall. Traffic police must divert traffic away from the fire site, to enable evacuation of people.
    1. Only II follows.
    2. Neither I nor II follows.
    3. Only I follows.
    4. Both I and II follow.
    Show answer

    Correct answer: option4 — Both I and II follow.

  77. Q.77PART-A
    Rakesh starts a business with a capital of ₹2,50,000. He incurs a loss of 5% during the first year. However, he makes a profit of 4% on his remaining investment during the second year. Finally, he makes a profit of 20% on his new capital during the third year. Find his total profit at the end of three years.
    1. ₹46,600
    2. ₹46,700
    3. ₹46,500
    4. ₹46,400
    Show answer

    Correct answer: option4 — ₹46,400

  78. Q.78PART-A
    The resistances of 30 ohm, 20 ohm and 60 ohm are connected in parallel. The equivalent resistance of the combination is ________.
    1. 12 ohm
    2. 0.1 ohm
    3. 110 ohm
    4. 10 ohm
    Show answer

    Correct answer: option4 — 10 ohm

  79. Q.79PART-A
    What is the scientific notation for 55,60,000 km?
    1. 5.56 × 104 km
    2. 5.56 × 106 km
    3. 55.6 × 104 km
    4. 556 × 106 km
    Show answer

    Correct answer: option2 — 5.56 × 106 km

  80. Q.80PART-A
    Which of the following is NOT a fundamental quantity in the SI system?
    1. Amount of substance
    2. Force
    3. Time
    4. Luminous intensity
    Show answer

    Correct answer: option2 — Force

  81. Q.81PART-A
    What will come in place of the question mark (?) in the following equation, if ‘+’ and ‘−’ are interchanged and ‘×’ and ‘÷’ are interchanged? 32 + 28 ÷ 3 × 4 − 15 = ?
    1. 32
    2. 26
    3. 20
    4. 29
    Show answer

    Correct answer: option2 — 26

  82. Q.82PART-A
    Which of the following is an example of uniform motion?
    1. A ball rolling down a slope
    2. A train moving at a constant speed on a straight track
    3. A sprinter running a 100-metre race with varying speed
    4. A vehicle moving through a crowded area
    Show answer

    Correct answer: option2 — A train moving at a constant speed on a straight track

  83. Q.83PART-A
    If the sum of lengths of two adjacent sides of a parallelogram is 12 cm, then the perimeter of the parallelogram is:
    1. 36 cm
    2. 34 cm
    3. 20 cm
    4. 24 cm
    Show answer

    Correct answer: option4 — 24 cm

  84. Q.84PART-A
    Two sets of numbers are given below. In each set of numbers, certain mathematical operation(s) on the first number results in the second number. Similarly, certain mathematical operation(s) on the second number results in the third number and so on. Which of the given options follows the same set of operations as in the given sets? (NOTE: Operations should be performed on the whole numbers, without breaking down the numbers into their constituent digits. E.g. 13 – Operations on 13 such as adding/subtracting/multiplying to 13 can be performed. Breaking down 13 into 1 and 3 and then performing mathematical operations on 1 and 3 is not allowed.) 11 – 121 – 221 – 171; 27 – 729 – 829 – 779
    1. 23 – 529 – 629 – 589
    2. 13 – 169 – 244 – 188
    3. 25 – 625 – 725 – 675
    4. 16 – 196 – 296 – 246
    Show answer

    Correct answer: option3 — 25 – 625 – 725 – 675

  85. Q.85PART-A
    Ampere is the SI unit of ________.
    1. mass
    2. electric power
    3. electric charge
    4. electric current
    Show answer

    Correct answer: option4 — electric current

  86. Q.86PART-A
    Which of the following represents an item with kinetic energy?
    1. A compressed spring
    2. A book resting on a table
    3. An extended rubber band
    4. A stone in motion
    Show answer

    Correct answer: option4 — A stone in motion

  87. Q.87PART-A
    A person saves 50% of his income. If his expenditure is ₹640, then his income (in ₹) is:
    1. 560
    2. 600
    3. 1,320
    4. 1,280
    Show answer

    Correct answer: option4 — 1,280

  88. Q.88PART-A
    Which of the following is NOT one of the 5S principles?
    1. Standardise
    2. Sort
    3. Supervise
    4. Sustain
    Show answer

    Correct answer: option3 — Supervise

  89. Q.89PART-A
    How many base units are given in the SI system?
    1. 7
    2. 3
    3. 11
    4. 9
    Show answer

    Correct answer: option1 — 7

  90. Q.90PART-A
    In winters, people wear jacket because _____.
    1. jacket allows the heat to flow from our body to surroundings
    2. it looks good
    3. fabric of jacket is an insulator of heat so it traps body heat
    4. fabric of jacket is a conductor of heat so it traps body heat
    Show answer

    Correct answer: option3 — fabric of jacket is an insulator of heat so it traps body heat

  91. Q.91PART-A
    The list price of an article is ₹5,000 and a discount of 70% is offered on the list price. What additional discount per cent on the already discounted price must be offered to a customer to bring the net selling price to ₹1,275?
    1. 16%
    2. 10%
    3. 18%
    4. 15%
    Show answer

    Correct answer: option4 — 15%

  92. Q.92PART-A
    How many significant figures are there in 4.700 m?
    1. 3
    2. 4
    3. 2
    4. 1
    Show answer

    Correct answer: option2 — 4

  93. Q.93PART-A
    Eight people are sitting in two parallel rows containing 4 people each in such a way that there is equal distance between adjacent persons. In row 1 – A, B, C and D are seated and all of them are facing south. In row 2 – P, Q, R and S are seated and all of them are facing north. Thus each person faces another person from the other row. Only three people sit to the right of R. D faces the person who is the immediate neighbour of S and P. C faces the person who sits second to the left of S. R does not face A. Who amongst the following faces B?
    1. P
    2. Q
    3. R
    4. S
    Show answer

    Correct answer: option3 — R

  94. Q.94PART-A
    Aditya is using two thin blankets instead of one thick blanket in winter to keep himself warm because ________.
    1. the friction between the two blankets produces heat
    2. the blankets are at a higher temperature than the surroundings
    3. two blankets are cheaper than one thick blanket
    4. the air trapped between the blankets is a poor conductor of heat
    Show answer

    Correct answer: option4 — the air trapped between the blankets is a poor conductor of heat

  95. Q.95PART-A
    E, F, G, H, P, Q, and R, are sitting around a circular table facing the centre. F sits fourth to the right of E. Only R sits between F and H. H is NOT an immediate neighbour of E. Only P sits between E and G. How many people sit between G and Q when counted from the right of G?
    1. Three
    2. Four
    3. Two
    4. One
    Show answer

    Correct answer: option3 — Two

  96. Q.96PART-A
    The resistance of a metallic wire is R. If the radius of the metallic wire is reduced to half of its initial value while keeping all other parameters the same, the new resistance becomes ______.
    1. 2R
    2. 4R
    Show answer

    Correct answer: option2 — 4R

  97. Q.97PART-A
    The mode of 4, 6, 4, 6, 5, 7, 5, 7, 4, 6, 7, 6 is:
    1. 7
    2. 4
    3. 6
    4. 5
    Show answer

    Correct answer: option3 — 6

  98. Q.98PART-A
    Two sets of numbers are given below. In each set of numbers, certain mathematical operation(s) on the first number results in the second number. Similarly, certain mathematical operation(s) on the second number results in the third number and so on. Which of the given options follows the same set of operations as in the given sets? (NOTE: Operations should be performed on the whole numbers, without breaking down the numbers into their constituent digits. E.g. 13 – Operations on 13 such as adding/subtracting/multiplying to 13 can be performed. Breaking down 13 into 1 and 3 and then performing mathematical operations on 1 and 3 is not allowed.) 4 – 8 – 18 – 9 6 – 12 – 22 – 11
    1. 8 – 16 – 26 – 13
    2. 9 – 18 – 28 – 20
    3. 3 – 15 – 12 – 20
    4. 11 – 13 – 22 – 63
    Show answer

    Correct answer: option1 — 8 – 16 – 26 – 13

  99. Q.99PART-A
    What is the first step when encountering a system failure in a workplace?
    1. Immediately restart all systems without inspection
    2. Disconnect all power sources permanently
    3. Ignore the failure and continue working
    4. Report the issue and follow the emergency protocol
    Show answer

    Correct answer: option4 — Report the issue and follow the emergency protocol

  100. Q.100PART-A
    An electric lamp with a resistance of 35 ohms and a conductor with a resistance of 5 ohms are connected to an 8 V battery in series. Calculate the current flowing through the circuit.
    1. 1.82 A
    2. 2 A
    3. 40 A
    4. 0.2 A
    Show answer

    Correct answer: option4 — 0.2 A

  101. Q.101PART-B
    Which of the following is true when there is an unbalanced star connected load in a three-phase system?
    1. The magnitude of current in each phase of the load is equal.
    2. The power factor in each phase of the load is equal.
    3. Imbalance in phase voltages.
    4. The current in the neutral terminal is zero.
    Show answer

    Correct answer: option3 — Imbalance in phase voltages.

  102. Q.102PART-B
    A statement and conclusion for pictorial drawing are given below. Determine the logical relationship between them. Statement: Pictorial drawings are three-dimensional and provide a visual representation of an object. Conclusion: Therefore, pictorial drawings are useful for describing the shape of a piece part or component.
    1. The conclusion is partially supported by the statement.
    2. The conclusion logically follows from the statement.
    3. The conclusion does not logically follow from the statement.
    4. The conclusion is unrelated to the statement.
    Show answer

    Correct answer: option2 — The conclusion logically follows from the statement.

  103. Q.103PART-B
    Which of the following screwdrivers has cross-shaped tips that are unlikely to slip from the cruciform slots in Philips recessed head screws?
    1. Cross-recess screwdriver
    2. Offset screwdriver
    3. Ratchet screwdriver
    4. Stumpy screwdriver
    Show answer

    Correct answer: option1 — Cross-recess screwdriver

  104. Q.104PART-B
    In the context of earthing system measurement, what does 'Earth resistance' refer to?
    1. The resistance between any two points of the ground with a distance of 1 metre
    2. The resistance between the live wire and the earth
    3. The ability of the ground to resist current flow
    4. The voltage required to activate the earthing system
    Show answer

    Correct answer: option3 — The ability of the ground to resist current flow

  105. Q.105PART-B
    In a logic circuit, three SPST (Single Pole Single Throw) switches are used to implement a logic gate. The switches are connected in series. What is the output of the circuit if all switches are closed?
    1. Undefined
    2. The output will depend on the type of gate used
    3. 1
    4. 0
    Show answer

    Correct answer: option3 — 1

  106. Q.106PART-B
    Connection of voltage transformer and current transformer across line are _______, respectively.
    1. series and series
    2. parallel and parallel
    3. parallel and series
    4. series and parallel
    Show answer

    Correct answer: option4 — series and parallel

  107. Q.107PART-B
    Which of the following actions is a part of the emergency response team's responsibilities during an active emergency?
    1. Conducting routine safety checks
    2. Preparing reports on emergency incidents
    3. Rescuing persons in immediate danger
    4. Scheduling regular evacuation drills
    Show answer

    Correct answer: option3 — Rescuing persons in immediate danger

  108. Q.108PART-B
    The RMS value of emf per phase of alternator is given by _______. (Given: Φ = flux per pole, f = frequency of induced emf, T is the number of coils or turns per phase and Z is the number of conductors or coil sides in series/phase in an alternator)
    1. 4.44 ΦZ
    2. 4.44 ΦfZ
    3. 4.44 ΦfT
    4. 2.22 ΦfT
    Show answer

    Correct answer: option3 — 4.44 ΦfT

  109. Q.109PART-B
    Which of the following statements about a star connected three phase system is correct?
    1. The neutral wire has higher voltage than the phase wires.
    2. There are two neutral wires in a star connected three phase system.
    3. The neutral wire carries no current in case of balanced ideal load.
    4. The neutral wire is used for grounding purposes only.
    Show answer

    Correct answer: option3 — The neutral wire carries no current in case of balanced ideal load.

  110. Q.110PART-B
    Two coils, A and B, have self-inductances of 120 μH and 300 μH, respectively. When a current of 1 A flows through coil A, it induces a flux linkage of 100 μWb turns in coil B. What is the mutual inductance between the coils?
    1. 100 μH
    2. 120 μH
    3. 300 μH
    4. 50 μH
    Show answer

    Correct answer: option1 — 100 μH

  111. Q.111PART-B
    In a transformer, insulation resistance test is carried out to measure:
    1. the resistance of the insulation between windings and core
    2. the inductance between different parts of the transformer
    3. frequency
    4. magnetic flux
    Show answer

    Correct answer: option1 — the resistance of the insulation between windings and core

  112. Q.112PART-B
    What is the primary reason for conducting a vehicle road test?
    1. To test how fast the vehicle can go
    2. To increase fuel efficiency
    3. To ensure the vehicle is functioning safely and correctly
    4. To avoid the need for inspections
    Show answer

    Correct answer: option3 — To ensure the vehicle is functioning safely and correctly

  113. Q.113PART-B
    What is the term used to describe programs that distinguish between uppercase and lowercase letters, treating "yes" and "YES" as different inputs?
    1. Numerical
    2. Alphabetical
    3. Case-sensitive
    4. Case-insensitive
    Show answer

    Correct answer: option3 — Case-sensitive

  114. Q.114PART-B
    What is the importance of following the manufacturer's guidelines for DC motor maintenance?
    1. Saves time and resources
    2. Increases the motor's power output
    3. Modifies the motor's design
    4. Ensures safe and efficient operation
    Show answer

    Correct answer: option4 — Ensures safe and efficient operation

  115. Q.115PART-B
    Which type of electrolytic capacitor is generally more stable and has better performance in small sizes?
    1. Aluminium capacitor
    2. Mica capacitor
    3. Ceramic capacitor
    4. Tantalum capacitor
    Show answer

    Correct answer: option1 — Aluminium capacitor

  116. Q.116PART-B
    What is the maximum total current allowed in a ring circuit as per IEE regulations?
    1. 10 amps
    2. 20 amps
    3. 50 amps
    4. 30 amps
    Show answer

    Correct answer: option4 — 30 amps

  117. Q.117PART-B
    What are the two types of mica capacitors?
    1. Electrolytic and paper capacitors
    2. Stacked foil and silvered mica capacitors
    3. Ceramic and film capacitors
    4. Variable and fixed capacitors
    Show answer

    Correct answer: option2 — Stacked foil and silvered mica capacitors

  118. Q.118PART-B
    What is the objective of testing an earthing system?
    1. To measure the insulation resistance of cables
    2. To test the current capacity of the earthing system
    3. To ensure the system has a low resistance path to the earth
    4. To check the voltage levels
    Show answer

    Correct answer: option3 — To ensure the system has a low resistance path to the earth

  119. Q.119PART-B
    A rectangular floor measuring 10 m × 8 m is to be tiled. If each tile covers 0.25 m², how many tiles are needed?
    1. 300
    2. 320
    3. 250
    4. 200
    Show answer

    Correct answer: option2 — 320

  120. Q.120PART-B
    Which of the following care and maintenance of a marking table is INCORRECT?
    1. The marking table should be protected from damage.
    2. The surface of the marking table should not be given a thin layer of oil.
    3. The marking table should be protected from rust.
    4. After use, the marking table should be cleaned with a soft cloth.
    Show answer

    Correct answer: option2 — The surface of the marking table should not be given a thin layer of oil.

  121. Q.121PART-B
    What is the primary goal of the 5S concept?
    1. To eliminate the need for maintenance
    2. To increase the number of safety regulations
    3. To improve workplace organisation and efficiency
    4. To replace traditional safety measures
    Show answer

    Correct answer: option3 — To improve workplace organisation and efficiency

  122. Q.122PART-B
    Which of the following types of DC motor is commonly used in electric traction applications such as trains and trams?
    1. Permanent Magnet DC Motor
    2. DC Series Motor
    3. DC Compound Motor
    4. DC Shunt Motor
    Show answer

    Correct answer: option2 — DC Series Motor

  123. Q.123PART-B
    Which of the following statements is/are true about Non-Functional Dimensions (NF) in engineering drawing? Statement 1: Non-functional Dimensions are shown without limits, as they do not affect the functionality of the component or space. Statement 2: Non-Functional Dimensions are typically used for reference purposes only, and do not impact the assembly or performance of the component or space.
    1. Neither statement is true
    2. Both statements are true
    3. Only statement 2 is true
    4. Only statement 1 is true
    Show answer

    Correct answer: option3 — Only statement 2 is true

  124. Q.124PART-B
    What is the primary reason for the heating effect in a conductor when an electric current passes through it?
    1. The movement of protons causes heat generation.
    2. The movement of electrons causes heat generation.
    3. The electric field in the conductor causes heat generation.
    4. The conductor absorbs heat from the surrounding environment.
    Show answer

    Correct answer: option2 — The movement of electrons causes heat generation.

  125. Q.125PART-B
    In a circuit with a NTC type thermistor and a fixed resistor connected in series connected to a DC power supply, what will happen to the output voltage if there is a rise in temperature?
    1. The output voltage will decrease.
    2. The output voltage will remain constant.
    3. The output voltage will increase.
    4. The output voltage will fluctuate depending on the resistor value.
    Show answer

    Correct answer: option3 — The output voltage will increase.

  126. Q.126PART-B
    What is the purpose of measuring the electrode resistance during the installation of an earthing system?
    1. To ensure proper grounding of electrical equipment
    2. To measure the insulation resistance of the system
    3. To ensure the earthing system has low impedance for fault current dissipation
    4. To determine the electrical load capacity of the system
    Show answer

    Correct answer: option3 — To ensure the earthing system has low impedance for fault current dissipation

  127. Q.127PART-B
    Which of the following is a primary difference between a primary and a secondary electrochemical cell?
    1. A primary cell can be recharged, while a secondary cell cannot be recharged.
    2. There is no difference between primary and secondary cells.
    3. A secondary cell produces more energy than a primary cell.
    4. A primary cell cannot be recharged, while a secondary cell can be recharged.
    Show answer

    Correct answer: option4 — A primary cell cannot be recharged, while a secondary cell can be recharged.

  128. Q.128PART-B
    Alternators are usually rated in:
    1. Horse Power
    2. Kilo Volt Ampere
    3. Kilo Watt
    4. Kilo Volt Ampere Reactive
    Show answer

    Correct answer: option2 — Kilo Volt Ampere

  129. Q.129PART-B
    What is the pinch-off voltage in a FET?
    1. The voltage at which the channel is "pinched off" and the current saturates
    2. The voltage where the drain-to-source voltage causes breakdown
    3. The voltage at which the gate-to-source voltage is zero
    4. The voltage at which the drain-to-source current is maximised
    Show answer

    Correct answer: option1 — The voltage at which the channel is "pinched off" and the current saturates

  130. Q.130PART-B
    What is the primary purpose of preventive maintenance?
    1. To increase the workload of employees
    2. To delay repairs until breakdowns occur
    3. To eliminate the need for regular inspections
    4. To reduce unexpected equipment failures
    Show answer

    Correct answer: option4 — To reduce unexpected equipment failures

  131. Q.131PART-B
    Which of the following is a major risk associated with fuel spillage?
    1. Increased productivity
    2. Better lubrication for workshop floors
    3. Fire hazards and environmental contamination
    4. Reduced need for ventilation
    Show answer

    Correct answer: option3 — Fire hazards and environmental contamination

  132. Q.132PART-B
    In crane and hoist applications, why is a DC series motor preferred over a DC shunt motor?
    1. It consumes less power at no load.
    2. It maintains constant speed regardless of load variations.
    3. It provides a high starting torque, which is required for lifting loads.
    4. It requires minimal maintenance compared to other motors.
    Show answer

    Correct answer: option3 — It provides a high starting torque, which is required for lifting loads.

  133. Q.133PART-B
    What is the unit of measurement for earth fault loop impedance?
    1. Volts (V)
    2. Amperes (A)
    3. Farads (F)
    4. Ohms (Ω)
    Show answer

    Correct answer: option4 — Ohms (Ω)

  134. Q.134PART-B
    Match the following designations of sheets with their respective trimmed sizes in length and breadth. Designation Trimmed Size A) A0 P) 297 × 420 B) A1 Q) 420 × 594 C) A2 R) 594 × 841 D) A3 S) 841 × 1189
    1. A-S ; B-R ; C-Q ; D-P
    2. A-S ; B-P ; C-Q ; D-R
    3. A-Q ; B-R ; C-S ; D-P
    4. A-P ; B-R ; C-Q ; D-S
    Show answer

    Correct answer: option1 — A-S ; B-R ; C-Q ; D-P

  135. Q.135PART-B
    In pipe earthing, what is used to connect the earthing conductor to the pipe?
    1. Bolts and nuts
    2. Soldering
    3. Welding
    4. Tape
    Show answer

    Correct answer: option3 — Welding

  136. Q.136PART-B
    In an N-channel MOSFET, the drain current ID​ increases as __________.
    1. the source-to-drain voltage decreases
    2. the drain-to-source voltage increases
    3. the gate-to-source voltage decreases
    4. the gate-to-source voltage increases above the threshold voltage
    Show answer

    Correct answer: option4 — the gate-to-source voltage increases above the threshold voltage

  137. Q.137PART-B
    The primary difference between a FET and a BJT is that _________.
    1. BJTs are more sensitive to temperature than FETs
    2. FETs are voltage-controlled devices, while BJTs are current-controlled devices
    3. FETs have a lower input impedance than BJTs
    4. FETs are current-controlled devices, while BJTs are voltage-controlled devices
    Show answer

    Correct answer: option2 — FETs are voltage-controlled devices, while BJTs are current-controlled devices

  138. Q.138PART-B
    Read the Assertion (A) and Reason (R) carefully, and select the correct option. Assertion (A): The earth resistance must be kept as low as possible to ensure that the earthing system is effective during fault conditions. Reason (R): A low resistance allows fault current to flow easily into the ground, ensuring safety by preventing electrical hazards.
    1. Assertion (A) is correct, but Reason (R) is incorrect.
    2. Both Assertion (A) and Reason (R) are correct, but the reason does not correctly explain the assertion.
    3. Assertion (A) is incorrect, but Reason (R) is correct.
    4. Both Assertion (A) and Reason (R) are correct, and the reason correctly explains the assertion.
    Show answer

    Correct answer: option4 — Both Assertion (A) and Reason (R) are correct, and the reason correctly explains the assertion.

  139. Q.139PART-B
    Which electrical component is used to perform a polarity test to check whether or not the switches are connected in phase/live cable?
    1. Ammeter
    2. Megger
    3. Multimeter
    4. Test lamp
    Show answer

    Correct answer: option4 — Test lamp

  140. Q.140PART-B
    Sine bars are used when a high degree of accuracy less than _________ is needed for measuring angles.
    1. 30 minutes
    2. 1 minute
    3. 1 degree
    4. 30 degrees
    Show answer

    Correct answer: option2 — 1 minute

  141. Q.141PART-B
    The Insulation Resistance value for a transformer is measured in:
    1. megaohms
    2. KVA
    3. kiloohms
    4. ohms
    Show answer

    Correct answer: option1 — megaohms

  142. Q.142PART-B
    Which of the following is a key electrical safety tip in a workshop?
    1. Ignore frayed wires if the device is still working
    2. Operate machines with wet hands
    3. Ensure electrical equipment is properly grounded
    4. Use water to clean electrical panels
    Show answer

    Correct answer: option3 — Ensure electrical equipment is properly grounded

  143. Q.143PART-B
    How should the electrode resistance be measured if multiple earthing electrodes are used in parallel?
    1. Use a clamp meter to measure the resistance of parallel electrodes
    2. Measure electrode resistance individually and then average the values
    3. Measure electrode resistance individually and then add it
    4. Measure the total resistance of the combined electrodes in parallel
    Show answer

    Correct answer: option4 — Measure the total resistance of the combined electrodes in parallel

  144. Q.144PART-B
    IGBT (Insulated Gate Bipolar Transistor) has ________.
    1. high on-state resistance
    2. second breakdown problems
    3. low input impedance
    4. high input impedance
    Show answer

    Correct answer: option4 — high input impedance

  145. Q.145PART-B
    The SI unit of 'ultimate stress' is ________.
    1. newton per meter (N/m)
    2. newton (N)
    3. pascal (Pa)
    4. joule per square meter (J/m²)
    Show answer

    Correct answer: option3 — pascal (Pa)

  146. Q.146PART-B
    What should be the position of the ‘OFF’ marking on a fireman’s switch?
    1. At the bottom
    2. On the side
    3. At the top
    4. In the centre
    Show answer

    Correct answer: option3 — At the top

  147. Q.147PART-B
    Which DC motor type provides the best speed regulation under varying loads?
    1. Cumulative Motor
    2. DC Shunt Motor
    3. Permanent Magnet DC Motor
    4. DC Series Motor
    Show answer

    Correct answer: option2 — DC Shunt Motor

  148. Q.148PART-B
    Which of the following methods is used for synchronising a three-phase alternator?
    1. Using damper grids in pole faces
    2. Kramer's Method
    3. Three Dark lamp method
    4. One Wattmeter method
    Show answer

    Correct answer: option3 — Three Dark lamp method

  149. Q.149PART-B
    Which of the following is true for a system with an unbalanced load of a three-phase system?
    1. The sum of phase angles of each phase is always 120°.
    2. In an unbalanced three-phase system, the neutral current is zero.
    3. The sum of the line currents is not necessarily zero.
    4. The line voltages are always equal.
    Show answer

    Correct answer: option4 — The line voltages are always equal.

  150. Q.150PART-B
    While performing short circuit test on a transformer to determine its parameter, instruments are placed on the:
    1. high voltage side, while the low voltage side is short circuit
    2. low voltage side, while the high voltage side is short circuit
    3. low voltage side, while the high voltage side is open circuit
    4. high voltage side, while the low voltage side is open circuit
    Show answer

    Correct answer: option1 — high voltage side, while the low voltage side is short circuit

  151. Q.151PART-B
    The voltage regulation in percentage for transformer is given by:
    Show answer

    Correct answer: option4

  152. Q.152PART-B
    _________________ recommend(s) 20 mm wide margins for sheet sizes AO and A1 in engineering drawings.
    1. Borders and frames: SP: 46 (2003)
    2. Custom grids
    3. Geographic coordinate systems
    4. Grid reference system
    Show answer

    Correct answer: option1 — Borders and frames: SP: 46 (2003)

  153. Q.153PART-B
    Which option shows the correct answer when 27°C is converted to the kelvin scale?
    1. – 300 K
    2. 300 K
    3. 246 K
    4. – 246 K
    Show answer

    Correct answer: option2 — 300 K

  154. Q.154PART-B
    Which device is used to protect against electric shocks and fires caused by earth leakage currents?
    1. ELCB
    2. ECB
    3. MCCB
    4. MCB
    Show answer

    Correct answer: option1 — ELCB

  155. Q.155PART-B
    A 100-mm centre-punch could have a 10-mm diameter body and a 6-mm diameter point ground to an angle of _________.
    1. 120°
    2. 60°
    3. 30°
    4. 90°
    Show answer

    Correct answer: option4 — 90°

  156. Q.156PART-B
    The energy stored (W) in an inductor is given by the formula _______, where C = Capacitance, V= Voltage, I = Current, and L= inductance.
    Show answer

    Correct answer: option1

  157. Q.157PART-B
    An angle greater than 180 degrees is referred to as ________________.
    1. an obtuse angle
    2. an acute angle
    3. a right angle
    4. a reflex angle
    Show answer

    Correct answer: option4 — a reflex angle

  158. Q.158PART-B
    Which of the following is a possible cause of an unbalanced load in a three-phase system?
    1. Symmetrical load across phases
    2. Equal phase currents
    3. Balanced supply voltages
    4. Differences in load resistance across phases
    Show answer

    Correct answer: option4 — Differences in load resistance across phases

  159. Q.159PART-B
    A three phase circuit is connected with balanced delta connected load of impedance 100 Ω. If the current in each phase is 5 A, the voltage across each load will be ______.
    1. 200 V
    2. 250 V
    3. 500 V
    4. 150 V
    Show answer

    Correct answer: option3 — 500 V

  160. Q.160PART-B
    According to Ohm’s Law, how is current related to voltage and resistance?
    1. It is inversely proportional to voltage and resistance.
    2. It has no relation with voltage or resistance.
    3. It is directly proportional to voltage and resistance.
    4. It is directly proportional to voltage and inversely proportional to resistance.
    Show answer

    Correct answer: option4 — It is directly proportional to voltage and inversely proportional to resistance.

  161. Q.161PART-B
    What is the primary purpose of shielding in electrical cables?
    1. To increase the current-carrying capacity of the cable
    2. To protect the cable from external electromagnetic interference
    3. To increase the voltage capacity of the cable
    4. To prevent heat loss from the cable
    Show answer

    Correct answer: option2 — To protect the cable from external electromagnetic interference

  162. Q.162PART-B
    For which of the following calipers, a screw and nut are provided for opening and closing the caliper legs?
    1. Firm joint calipers
    2. Spring joint calipers
    3. Leg and point calipers
    4. Simple calipers
    Show answer

    Correct answer: option2 — Spring joint calipers

  163. Q.163PART-B
    The correct instant of synchronising is when busbar and incoming machine voltages are of _________ magnitude and have ___________ frequency.
    1. unequal, unequal
    2. equal, the same
    3. unequal, the same
    4. equal, unequal
    Show answer

    Correct answer: option2 — equal, the same

  164. Q.164PART-B
    The region of operation in a FET where the drain current is independent of the drain voltage and only depends on the gate-to-source voltage is called the ____________.
    1. saturation region
    2. ohmic region
    3. cutoff region
    4. active region
    Show answer

    Correct answer: option1 — saturation region

  165. Q.165PART-B
    Which component in an MCB is responsible for detecting a short circuit?
    1. Arc chute
    2. Bimetallic strip
    3. Solenoid
    4. Handle
    Show answer

    Correct answer: option3 — Solenoid

  166. Q.166PART-B
    Which of the following is INCORRECT about line standard?
    1. Subject to parallax error
    2. More accurate due to line thickness
    3. Used to measure the distance between two engraved lines
    4. Quick measurements over a wide range
    Show answer

    Correct answer: option2 — More accurate due to line thickness

  167. Q.167PART-B
    The accuracy of measurement by a try square is about:
    1. 0.004 mm per 10 mm length
    2. 0.02 mm per 10 mm length
    3. 0.002 mm per 10 mm length
    4. 0.001 mm per 10 mm length
    Show answer

    Correct answer: option3 — 0.002 mm per 10 mm length

  168. Q.168PART-B
    Natural rubber is soft at high temperatures and brittle at low temperatures; hence raw rubber is heated with sulphur and other additives at a temperature range between 373 – 415 K to make it strong. This process is called ______ of rubber.
    1. molding
    2. latex
    3. extrusion
    4. vulcanisation
    Show answer

    Correct answer: option4 — vulcanisation

  169. Q.169PART-B
    Why do cars have treaded tyres?
    1. To increase speed
    2. To decrease friction
    3. To increase friction and grip on the road
    4. To reduce weight
    Show answer

    Correct answer: option3 — To increase friction and grip on the road

  170. Q.170PART-B
    Which of the following types of resistors is preferred for high-current applications?
    1. Wire-wound resistor
    2. Carbon composition resistor
    3. Variable resistor
    4. Film resistor
    Show answer

    Correct answer: option1 — Wire-wound resistor

  171. Q.171PART-B
    Why are alternators connected in parallel?
    1. To increase the output frequency
    2. To meet greater power demand of load circuit
    3. To increase the starting torque
    4. To improve the power factor
    Show answer

    Correct answer: option2 — To meet greater power demand of load circuit

  172. Q.172PART-B
    Why is a DC compound generator preferred for industrial loads?
    1. It provides better efficiency.
    2. It has constant voltage characteristics.
    3. It has no losses.
    4. It is easier to manufacture.
    Show answer

    Correct answer: option2 — It has constant voltage characteristics.

  173. Q.173PART-B
    Which of the following conversions are correct?
    1. 1 L = 1000 dm3 and 1 mL = 1000 cm3
    2. 1 L = 1 dm3 and 1 mL = 1 cm3
    3. 1000 L = 1 dm3 and 1000 mL = 1 cm3
    4. 1000 L = 1 dm3 and 1 mL = 1000 cm3
    Show answer

    Correct answer: option2 — 1 L = 1 dm3 and 1 mL = 1 cm3

  174. Q.174PART-B
    What is the primary cause of sudden insulation resistance failure in a DC generator?
    1. Excessive armature current
    2. High ambient temperature
    3. Moisture ingress or contamination
    4. Increase in rotational speed
    Show answer

    Correct answer: option3 — Moisture ingress or contamination

  175. Q.175PART-B
    Transformer oil should have _______ dielectric strength and _______ viscosity.
    1. low; low
    2. high; high
    3. high; low
    4. low; high
    Show answer

    Correct answer: option3 — high; low

Answer key

Option number of the correct answer for each question.

1121344451617481911031111221331421511611741831942042132212332442532622742812943023113233323433543643713833944044124224314424544624714844915035145215315445545615745835926036116226336426536646746846927047137247317437527647747847928028128228348438548648748838919039149229339449539629739819941004101310221031104310531064107310831093110111111123113311441151116411721183119212021213122212331242125312631274128212911304131313231334134113531364137213841394140214111423143414441453146314721483149415011514152115321541155415611574158415931604161216221632164116531662167316841693170117121722173217431753

About this paper

Source: the candidate response sheet of the 6 May 2025 shift, which lists each question with its options and the correct option. Questions are shown in the order of that sheet. The subject tags (Mathematics, Reasoning, General Awareness) are assigned by keywords, so a few may be off. If you spot a wrong question or answer, tell us on the contact page.

Disclaimer: We do not own this question paper or its questions. They belong to the government body that conducted the examination. The paper is shared here in good faith, free of cost, only to help students prepare better.

Marking in this exam: +1 for a correct answer and −1/3 for a wrong one. Duration 150 minutes.

More RRB ALP question papers

Free Study Planner