-
Q.1PART-A
The potential energy of an object is equivalent to the _______.
- energy lost
- energy transferred
- change in velocity
- change in speed
Show answer
Correct answer: option2 — energy transferred
-
Q.2PART-A
In a certain code language, ‘WIDE’ is coded as ‘8694’ and ‘INKS’ is coded as ‘3917’. What is the code for ‘I’ in the given code language?
- 6
- 7
- 3
- 9
Show answer
Correct answer: option4 — 9
-
Q.3PART-A
Which of the following terms is used to describe the pollutants that originate from identifiable sources, such as factories or vehicles?
- Radicle Pollution
- Non-point Source Pollution
- Random Pollution
- Point Source Pollution
Show answer
Correct answer: option4 — Point Source Pollution
-
Q.4PART-A
Read the given statements and conclusions carefully. Assuming that the information given in the statements is true, even if it appears to be at variance with commonly known facts, decide which of the given conclusion(s) logically follow(s) from the statements. Statements: I. All books are pencils. II. All pencils are cardboards. III. All cardboards are notebooks. Conclusions: I. Some notebooks are pencils. II. Some cardboards are books. III. Some notebooks are books.
- Only conclusions II and III follow.
- All conclusions I, II and III follow.
- Only conclusions I and III follow.
- Only conclusions I and II follow.
Show answer
Correct answer: option2 — All conclusions I, II and III follow.
-
Q.5PART-A
Which term is used to describe the closeness of the measured value to the standard or true value?
- Approximate
- Precision
- Accuracy
- Mean
Show answer
Correct answer: option3 — Accuracy
-
Q.6PART-A
The marked price of an article was ₹27,500. The shopkeeper gave two successive discounts; the first discount was 20%, and the second was at a rate of 30% of the first discount. What is the selling price (in ₹) of the article?
- 20,086
- 26,080
- 20,860
- 20,680
Show answer
Correct answer: option4 — 20,680
-
Q.7PART-A
The two sides CB and BA of triangle ABC are produced to CE and BD, respectively, in such a way that ∠DAC = 110° and ∠ABE = 130°. Which of the following options is true?
- AC <AB < BC
- BC <AC < AB
- BC <AB < AC
- AB <AC < BC
Show answer
Correct answer: option1 — AC <AB < BC
-
Q.8PART-A
Based on the English alphabetical order, three of the following four letter-cluster pairs are alike in a certain way and thus form a group. Which letter-cluster pair DOES NOT belong to that group? (Note: The odd one out is not based on the number of consonants/vowels or their position in the letter-cluster pair)
- DY – AG
- BW – YE
- QL – NT
- KF – HM
Show answer
Correct answer: option4 — KF – HM
-
Q.9PART-A
In a certain code language, ‘BOAT’ is coded as ‘8654’ and ‘AIDS’ is coded as ‘3517’. What is the code for ‘A’ in the given code language?
- 5
- 6
- 3
- 8
Show answer
Correct answer: option1 — 5
-
Q.10PART-A
Which of the following tools is commonly used to support the 'Standardize' step in the 5S methodology?
- Cleaning supplies
- Floor markings
- Job cycle charts
- Labels and signs
Show answer
Correct answer: option3 — Job cycle charts
-
Q.11PART-A
What is the kinetic energy possessed by an object having mass 25 kg and moving with a uniform velocity of 2 m s⁻1?
- 120 J
- 80 J
- 100 J
- 50 J
Show answer
Correct answer: option4 — 50 J
-
Q.12PART-A
What should come in place of the question mark (?) in the given series? WU5, SQ7, NL11, ?
- HF13
- HE15
- GE17
- HF17
Show answer
Correct answer: option1 — HF13
-
Q.13PART-A
The speed of a bus is 6 metres/second. The distance (in kilometres) travelled by the bus in 8 hours and 20 minutes is:
- 184
- 180
- 185
- 175
Show answer
Correct answer: option2 — 180
-
Q.14PART-A
Which of the following is the correct statement of Ohm’s Law?
- The potential difference across the ends of a conductor is directly proportional to the current flowing through it.
- The potential difference across the ends of a conductor is inversely proportional to the current flowing through it.
- If the potential difference across the two ends of a conductor is 1 V and the current through it is 1A, then the resistance of the conductor is 2Ω.
- Current through a resistor is directly proportional to its resistance.
Show answer
Correct answer: option1 — The potential difference across the ends of a conductor is directly proportional to the current flowing through it.
-
Q.15PART-A
Which of the following is NOT correct?
- A person jogging in the park is not an example of uniform circular motion.
- The motion of satellite around Earth in a circular orbit is uniform circular motion.
- The distance-time graph of an object moving with uniform speed is not a straight line.
- An object moving with a constant velocity represents uniform motion.
Show answer
Correct answer: option3 — The distance-time graph of an object moving with uniform speed is not a straight line.
-
Q.16PART-A
- 33
- 28
- 21
- 31
Show answer
Correct answer: option4 — 31
-
Q.17PART-A
Which element is used in thermometers?
- Bromine
- Lead
- Mercury
- Gallium
Show answer
Correct answer: option3 — Mercury
-
Q.18PART-A
Based on the English alphabetical order, three of the following four letter-clusters are alike in a certain way and thus form a group. Which letter-cluster DOES NOT belong to that group? (Note: The odd one out is not based on the number of consonants/vowels or their position in the letter-cluster.)
- EKJR
- VBZI
- IOMV
- GMKT
Show answer
Correct answer: option1 — EKJR
-
Q.19PART-A
Given below are two sets of numbers. Both the sets are formed using the same mathematical equations or follow a common pattern. Which of the given options follows the same set of mathematical equations or patterns as the sets given in the question? 4 – 9 – 25 – 64 – 169; 16 – 49 – 121 – 324 – 841
- 16 – 36 – 64 – 100 – 144
- 64 – 225 – 529 – 1444 – 3721
- 4 – 16 – 36 – 64 – 100
- 64 – 100 – 144 – 196 – 256
Show answer
Correct answer: option2 — 64 – 225 – 529 – 1444 – 3721
-
Q.20PART-A
The thickness of a thread is measured by a student using a microscope of magnification 100. After making 30 observations, he finds the average width of the thread is 5.7 mm. What is the estimated thickness of the thread?
- 171 mm
- 0.057 mm
- 0.09 mm
- 0.57 mm
Show answer
Correct answer: option2 — 0.057 mm
-
Q.21PART-A
A refrigerator seller offers a discount of 10% on its listed price of ₹57,500 and still earns a profit of 15%. The cost price of the refrigerator is:
- ₹42,000
- ₹45,000
- ₹48,000
- ₹40,000
Show answer
Correct answer: option2 — ₹45,000
-
Q.22PART-A
Which of the following actions involves scientific work?
- Holding a large load on one's head while standing motionless
- Watching a film
- Climbing up the stairs
- Spending time conversing with friends
Show answer
Correct answer: option3 — Climbing up the stairs
-
Q.23PART-A
Which of the following features is unique to Telegram compared to WhatsApp and Facebook Messenger?
- Integration with Facebook for seamless sharing
- Ability to create channels for broadcasting messages to large audiences
- End-to-end encryption for all messages
- Voice and video calling capabilities
Show answer
Correct answer: option2 — Ability to create channels for broadcasting messages to large audiences
-
Q.24PART-A
What is the primary purpose of netiquette in online communication?
- To improve typing speed
- To ensure polite and respectful interactions
- To increase the number of followers on social media
- To enhance internet connection speed
Show answer
Correct answer: option2 — To ensure polite and respectful interactions
-
Q.25PART-A
When reporting a fire in an emergency, what is the most critical information to provide to emergency services?
- The likely cause of the fire and the building owner's name
- The weather conditions at the time of the fire
- The colour of the smoke and the direction it is moving
- How the fire started and if someone is injured or missing
Show answer
Correct answer: option4 — How the fire started and if someone is injured or missing
-
Q.26PART-A
If the length, the breadth, and the height of a cuboid are 5 m, 2 m, and 50 cm, respectively, then find its volume.
- 5 m3
- 500 m3
- 20 m3
- 50 m3
Show answer
Correct answer: option1 — 5 m3
-
Q.27PART-A
Which of the following is the primary reason for adopting scientifically designed methods for safely disposing of toxic waste from automobiles?
- To improve vehicle lifespan by minimising mechanical wear
- To reduce fuel consumption and improve overall efficiency
- To protect human health from harmful fumes and dust in the air
- To increase vehicle performance by optimising engine efficiency
Show answer
Correct answer: option3 — To protect human health from harmful fumes and dust in the air
-
Q.28PART-A
How does retrofitting an old building with energy-efficient windows impact energy consumption?
- It causes a rise in indoor temperatures.
- It decreases the building's heating and cooling costs.
- It has no effect on energy consumption.
- It increases the need for artificial lighting.
Show answer
Correct answer: option2 — It decreases the building's heating and cooling costs.
-
Q.29PART-A
Which of the following statements is correct?
- Plastic and wood allow heat to pass through them easily.
- All metals are poor conductors of heat.
- Dry air is a good conductor of heat.
- Copper and aluminium are good conductors of heat.
Show answer
Correct answer: option4 — Copper and aluminium are good conductors of heat.
-
Q.30PART-A
In an electrical circuit, ‘n’ number of 1 Ω resistors are connected in parallel. When one of the resistors is eliminated, the overall resistance of the circuit is ______.
Show answer
Correct answer: option3
-
Q.31PART-A
What is the SI unit for solid angle?
- Radian
- Metre
- Steradian
- Candela
Show answer
Correct answer: option3 — Steradian
-
Q.32PART-A
T-Square is used to _______________ in engineering drawings.
- transfer dimensions and dividing lines into a number of equal parts
- draw curved lines on drawing sheets
- draw horizontal lines, parallel lines and to guide/hold the setsquares
- support the drawing paper/tracing paper for making drawings
Show answer
Correct answer: option3 — draw horizontal lines, parallel lines and to guide/hold the setsquares
-
Q.33PART-A
- 4
- 1
- 3
- 2
Show answer
Correct answer: option4 — 2
-
Q.34PART-A
Which is the least number that must be subtracted from 5563 to make it exactly divisible by 18?
- 7
- 3
- 5
- 1
Show answer
Correct answer: option4 — 1
-
Q.35PART-A
If ‘A’ stands for ‘÷’, ‘B’ stands for ‘×’, ‘C’ stands for ‘+’ and ‘D’ stands for ‘−’, then what will come in place of the question mark (?) in the following equation? 47 D 25 A 5 C 2 B 9 = ?
- 60
- 62
- 56
- 58
Show answer
Correct answer: option1 — 60
-
Q.36PART-A
Pipes A and B can fill a rectangular tank in 40 minutes and 120 minutes, respectively. Pipe C can empty the completely filled same tank in 240 minutes. If pipes A, B and C are opened at the same time, then how many minutes will it take to fill the tank?
Show answer
Correct answer: option3
-
Q.37PART-A
The weights (in kg) of 20 students of a class have been recorded as 35, 42, 56, 44, 55, 44, 36, 44, 49, 48, 55, 35, 44, 47, 49, 48, 56, 44, 37 and 35. The modal weight (in kg) of the class is:
- 44
- 37
- 45
- 47
Show answer
Correct answer: option1 — 44
-
Q.38PART-A
Show answer
Correct answer: option4
-
Q.39PART-A
A can do a work in 14 hours. B can do the same work in 21 hours. A started working alone. After how many hours should B join A so that the whole work is completed in 10 hours?
- 3.5
- 4
- 4.5
- 3
Show answer
Correct answer: option2 — 4
-
Q.40PART-A
If an electric load draws a current of 2 A for 1 second, then calculate the number of electrons (with charge 1.6 × 10-19 C) passing through the load.
- 0.25 × 1020
- 1.25 × 1019
- 0.25 × 1019
- 1.25 × 1020
Show answer
Correct answer: option2 — 1.25 × 1019
-
Q.41PART-A
Two sets of numbers are given below. In each set of numbers, certain mathematical operation(s) on the first number results in the second number. Similarly, certain mathematical operation(s) on the second number results in the third number and so on. Which of the given options follows the same set of operations as in the given sets? (NOTE: Operations should be performed on the whole numbers, without breaking down the numbers into their constituent digits. E.g. 13 – Operations on 13 such as adding/subtracting/multiplying to 13 can be performed. Breaking down 13 into 1 and 3 and then performing mathematical operations on 1 and 3 is not allowed.) 988 – 494 – 444 – 534; 894 – 447 – 397 – 487
- 226 – 113 – 144 – 268
- 138 – 69 – 14 – 98
- 682 – 341 – 291 – 381
- 586 – 293 – 244 – 328
Show answer
Correct answer: option3 — 682 – 341 – 291 – 381
-
Q.42PART-A
Which of the following is generally the temperature range in a laboratory thermometer?
- −10°C to 150°C
- 35°C to 42°C
- −10°C to 110°C
- −100°C to 130°C
Show answer
Correct answer: option3 — −10°C to 110°C
-
Q.43PART-A
Under which Section of the Factories Act, of 1948, is the employment of women and children near cotton openers prohibited?
- Section 27
- Section 25
- Section 21
- Section 29
Show answer
Correct answer: option1 — Section 27
-
Q.44PART-A
Which of the following letter-number clusters will replace the question mark (?) in the given series to make it logically complete? AD8, FI16, KN24, ?
- PS32
- OS32
- PS35
- OR35
Show answer
Correct answer: option1 — PS32
-
Q.45PART-A
Why does a combination of two thin blankets keep you warmer in the winter than a single thick blanket?
- Two thin blankets generate more heat than one thick blanket.
- Two thin blankets allow more heat to escape, keeping you warmer.
- Two blankets create an additional insulating layer of air, reducing heat loss.
- Two thin blankets absorb more heat from the surroundings than one thick blanket.
Show answer
Correct answer: option3 — Two blankets create an additional insulating layer of air, reducing heat loss.
-
Q.46PART-A
What is the ratio of the areas of two successive format sheet sizes created by either halving along the length or doubling along the width?
- 2 : 1
- 4 : 1
- 1 : 2
- 1 : 4
Show answer
Correct answer: option3 — 1 : 2
-
Q.47PART-A
What is the first step to take in case of a power failure in a workshop?
- Panic and leave the premises immediately
- Continue working as usual
- Check if emergency lighting and backup power are functional
- Ignore the situation and wait for power to return
Show answer
Correct answer: option3 — Check if emergency lighting and backup power are functional
-
Q.48PART-A
Eight people are sitting in two parallel rows containing 4 people each in such a way that there is equal distance between adjacent persons. In row 1 – A, B, C and D are seated and all of them are facing south. In row 2 – P, Q, R and S are seated and all of them are facing north. Thus each person faces another person from the other row. No one sits to the left of B. R faces the person who sits second to the right of D. C faces the person who is the immediate neighbour of Q and R, B does not face S. Who amongst the following faces P?
- B
- D
- C
- A
Show answer
Correct answer: option1 — B
-
Q.49PART-A
Which of the following statements is NOT true?
- The range of clinical thermometer is 35 to 42°C.
- Clinical thermometer should not be used to measure the temperature of boiling water.
- Laboratory thermometer cannot be used to measure body temperature.
- Clinical and laboratory thermometers are the same.
Show answer
Correct answer: option4 — Clinical and laboratory thermometers are the same.
-
Q.50PART-A
ABC Association meeting is to be held on the 2nd Sunday of next month. The cost of the registration is ₹50 per person. Lunch will be provided to the participants at an additional cost of ₹24. If the number of participants who paid for lunch was 100 more than the members who did not, and if the total receipts for registrations and lunch is ₹69,400, how many people registered and how many lunches are to be prepared, respectively?
- 1100 and 600
- 1100 and 1100
- 500 and 600
- 1100 and 500
Show answer
Correct answer: option1 — 1100 and 600
-
Q.51PART-A
In a certain code language, ‘GOES’ is coded as ‘8624’ and ‘SNYC’ is coded as ‘3817’. What is the code for ‘S’ in the given code language?
- 8
- 2
- 3
- 4
Show answer
Correct answer: option1 — 8
-
Q.52PART-A
Why is regular maintenance of HVAC systems considered a medium ECO?
- It increases the cost of energy.
- It speeds up system breakdowns.
- It decreases the system's energy consumption.
- It prevents overheating of the system.
Show answer
Correct answer: option3 — It decreases the system's energy consumption.
-
Q.53PART-A
Based on the English alphabetical order, three of the following four letter-clusters are alike in a certain way and thus form a group. Which letter-cluster DOES NOT belong to that group? (Note: The odd one out is not based on the number of consonants/vowels or their position in the letter-cluster.)
- JNEL
- CGXF
- QULS
- UYPW
Show answer
Correct answer: option2 — CGXF
-
Q.54PART-A
Among three partners A, B and C in a business. The capital of B is equal to half the difference between thrice the capital of C and twice the capital of A. If at the end of the year, they received a profit of ₹25,415, what is the share of C (in ₹)?
- 9,166
- 8,666
- 11,666
- 10,166
Show answer
Correct answer: option4 — 10,166
-
Q.55PART-A
What should come in place of the question mark (?) in the given series? 62 73 87 104 124 ?
- 134
- 142
- 147
- 153
Show answer
Correct answer: option3 — 147
-
Q.56PART-A
A person saves 50% of his income. If his expenditure is ₹440, then his income (in ₹) is:
- 880
- 560
- 920
- 600
Show answer
Correct answer: option1 — 880
-
Q.57PART-A
What is the dimensional equation of mass density (ρ) ?
- [M L-3 T-2]
- [M L-2 T0]
- [M L-3 T0]
- [M0 L3 T0]
Show answer
Correct answer: option3 — [M L-3 T0]
-
Q.58PART-A
Show answer
Correct answer: option3
-
Q.59PART-A
A man rides a bicycle from Point A to Point B in 10 minutes and comes back to Point B along the same path in 10 minutes. If the distance between Points A and B is 1 km, calculate his average velocity?
- 1.6 m/s
- 0 m/s
- 3.3 m/s
- 0.1 m/s
Show answer
Correct answer: option2 — 0 m/s
-
Q.60PART-A
Which of the following letter-clusters should replace # and % so that the pattern and relationship followed between the letter-cluster pair on the left side of :: is the same as that on the right side of ::? # : KHM :: OLQ : %
- # = LIN, % = NKP
- # = LIN, % = NKO
- # = LIN, % = NLP
- # = LIM, % = NKP
Show answer
Correct answer: option1 — # = LIN, % = NKP
-
Q.61PART-A
E, F, G, H, P, Q, and R, are sitting around a circular table facing the centre. F sits third to the left of H. Only two people sit between H and G when counted from the right of H. Q is an immediate neighbor of G. P is NOT an immediate neighbour of H. E is an immediate neighbour of Q. Who sits second to the left of E?
- P
- H
- G
- R
Show answer
Correct answer: option4 — R
-
Q.62PART-A
An electric heater of resistance 50 Ω uses a current of 3 A. Determine the heat generated in 20 seconds.
- 5000 J
- 60 J
- 9000 J
- 1000 J
Show answer
Correct answer: option3 — 9000 J
-
Q.63PART-A
Given below are two sets of numbers. Both the sets are formed using the same mathematical equations or follow a common pattern. Which of the given options follows the same set of mathematical equations or patterns as the sets given in the question? 1333 – 1730 – 2199 – 2746 – 3377 218 – 345 – 514 – 731 – 1002
- 123 – 146 – 171 – 198 – 227
- 38 – 51 – 66 – 83 – 102
- 3 – 6 – 11 – 18 – 27
- 3 – 10 – 29 – 66 – 127
Show answer
Correct answer: option4 — 3 – 10 – 29 – 66 – 127
-
Q.64PART-A
Find the minimum value of 2x2 − 5x − 3 and also find x.
- 6.125 and x = 1.2
- −6.125 and x = 1.25
- 6.125 and x = 1.25
- −6.125 and x = 0.25
Show answer
Correct answer: option2 — −6.125 and x = 1.25
-
Q.65PART-A
- Fitted in the workshop
- Drilled and fitted on-site
- Drilled in the workshop
- Drilled on-site
Show answer
Correct answer: option1 — Fitted in the workshop
-
Q.66PART-A
Which of the following is an ethical concern related to Information Technology?
- Increased accessibility to educational resources
- Reduction in administrative costs
- Enhancement of communication channels
- Privacy violations and data breaches
Show answer
Correct answer: option4 — Privacy violations and data breaches
-
Q.67PART-A
Select the pair which follows the same pattern as that followed by the two sets of pairs given below. Both pairs follow the same pattern. ARF : YTH WVJ : UXL
- MEL : HZN
- KXF : HZH
- QEB : NBD
- SZN : QBP
Show answer
Correct answer: option4 — SZN : QBP
-
Q.68PART-A
What is necessary for a circuit to have electric current flowing through it?
- Only wire
- Only bulb
- Only switch
- A closed conducting path with a voltage source
Show answer
Correct answer: option4 — A closed conducting path with a voltage source
-
Q.69PART-A
A, B, C, D, E and F live on six different floors of the same building. The lowermost floor in the building is numbered 1, the floor above it is numbered 2 and so on till the topmost floor is numbered 6. E lives on an even-numbered floor but not 4. The sum of floors on which E and B live is 9. Only three people live between A and C. The sum of floors on which F and C live is 3. What is the sum of floors on which B and F live?
- 5
- 6
- 4
- 7
Show answer
Correct answer: option1 — 5
-
Q.70PART-A
If 21.6 : x :: x : 29.4, and x > 0, then find the value of x.
- 25.4
- 23.9
- 25.2
- 23.3
Show answer
Correct answer: option3 — 25.2
-
Q.71PART-A
Which of the following is a main greenhouse gas that is responsible for global warming?
- Nitrogen
- Helium
- Carbon Dioxide
- Oxygen
Show answer
Correct answer: option3 — Carbon Dioxide
-
Q.72PART-A
Two trains are running in opposite directions at the same speed. The length of each train is 175 m. If they cross each other in 7 s, the speed of each train is:
- 90 km/hr
- 85 km/hr
- 75 km/hr
- 80 km/hr
Show answer
Correct answer: option1 — 90 km/hr
-
Q.73PART-A
- Orthographic view
- Oblique view
- Isometric view
- Perspective view
Show answer
Correct answer: option1 — Orthographic view
-
Q.74PART-A
Which of the following is NOT an SI unit?
- Kilogram
- Hour
- Metre
- Mole
Show answer
Correct answer: option2 — Hour
-
Q.75PART-A
Which of the following is NOT a good heat conductor?
- Aluminum
- Fur
- Iron
- Copper
Show answer
Correct answer: option2 — Fur
-
Q.76PART-A
Which of the following options is NOT a necessary characteristic of a kite?
- The pairs of opposite angles are bisected by the corresponding diagonals.
- At least one pair of opposite angles is congruent.
- At least one diagonal is bisected by the other diagonal.
- The diagonals are perpendicular to each other.
Show answer
Correct answer: option1 — The pairs of opposite angles are bisected by the corresponding diagonals.
-
Q.77PART-A
What should come in place of the question mark (?) in the given series? 179 171 163 ? 147 139
- 157
- 153
- 151
- 155
Show answer
Correct answer: option4 — 155
-
Q.78PART-A
Four chairs and a table set up cost ₹22,000. Determine the table's cost, if it is ₹2,000 more expensive than the chair.
- ₹6,500
- ₹4,000
- ₹5,000
- ₹6,000
Show answer
Correct answer: option4 — ₹6,000
-
Q.79PART-A
- 48 cm
- 40 cm
- 21 cm
- 42 cm
Show answer
Correct answer: option4 — 42 cm
-
Q.80PART-A
Which of the following processes causes accumulation of heavy metals such as lead and mercury in soil?
- Natural soil formation
- Water evaporation
- Ozone layer depletion
- Improper disposal of industrial wastes
Show answer
Correct answer: option4 — Improper disposal of industrial wastes
-
Q.81PART-A
Read the given statement and conclusions carefully. Assuming that the information given in the statement is true, even if it appears to be at variance with commonly known facts, decide which of the given conclusion(s) logically follow(s) from the statement. Statement: Over the past year, there has been a noticeable increase in respiratory diseases in City W. According to a public health study, this increase is related to an increase in the number of cars on the road, which has raised air pollution levels. Conclusions: I. Increased vehicular traffic contributes to higher levels of air pollution. II. Improving public transportation would reduce respiratory illnesses in City W.
- Only conclusion II follows.
- Neither conclusion I nor II follows.
- Only conclusion I follows.
- Both conclusions I and II follow.
Show answer
Correct answer: option4 — Both conclusions I and II follow.
-
Q.82PART-A
A force of 6 N is exerted on an object, resulting in its displacement of 2 m in the direction of the force. If the force is constant during the displacement, what is the work done in this case?
- 25 J
- 12 J
- 3 J
- 10 J
Show answer
Correct answer: option2 — 12 J
-
Q.83PART-A
In order to resolve disputes arising from cyber crime, such as tampering with computer source documents, hacking the computer system, using password of another person and publishing sensitive personal data of others without their consent, a forum has been established by the Central Government (India) in accordance with the provisions contained under Section 48(1) of the Information Technology Act, 2000. What is the name of that forum?
- Cyber Appellate Tribunal
- Cybercrime Reporting Tribunal
- Internet Crime Complaint Center
- National Cybercrime Reporting Station
Show answer
Correct answer: option1 — Cyber Appellate Tribunal
-
Q.84PART-A
Calculate the resistance of the bulb filament if it draws 200 mA current from 220 V source.
- 0 Ω
- 1100 Ω
- 220 Ω
- 44 Ω
Show answer
Correct answer: option2 — 1100 Ω
-
Q.85PART-A
If 24 joules of work is done in moving a charge of 2 coulombs across two points, then what will be the correct voltage across these two points?
- 12 V
- 48 V
- 2 V
- 24 V
Show answer
Correct answer: option1 — 12 V
-
Q.86PART-A
A mass m is moving with a velocity v and its kinetic energy is K. What will be the new kinetic energy if the velocity is doubled?
- 4 K
- K/2
- 2 K
- K
Show answer
Correct answer: option1 — 4 K
-
Q.87PART-A
A porter lifts a 10 kg luggage from the ground and places it on his head, 2.5 m above the ground. Calculate the work done by him on the luggage. (Take g = 10 ms−2.)
- 250 N
- 200 J
- 100 J
- 250 J
Show answer
Correct answer: option4 — 250 J
-
Q.88PART-A
Which of the following is NOT correct about Joule’s law of heating?
- Heat produced in a resistor is directly proportional to the square of the current for a given resistance.
- Heat produced in a resistor is directly proportional to the time for which the current flows through the resistor.
- Heat produced in a resistor is directly proportional to the resistance for a given current.
- Heat produced in a resistor is inversely proportional to the square of the current for a given resistance.
Show answer
Correct answer: option4 — Heat produced in a resistor is inversely proportional to the square of the current for a given resistance.
-
Q.89PART-A
What should come in place of the question mark (?) in the given alpha-numeric series? Y13, F11, L9, Q7, U5, X3, ?
- Y1
- A1
- Z1
- Z2
Show answer
Correct answer: option3 — Z1
-
Q.90PART-A
Which of the following statements is INCORRECT?
- Burning of feet on hot sand is an example of heat transfer by conduction.
- Conduction is the process of heat transfer from hotter body to colder body.
- Conduction is the process of heat transfer that does not require any medium to transfer heat.
- In solids, heat transfer is typically carried out through conduction.
Show answer
Correct answer: option3 — Conduction is the process of heat transfer that does not require any medium to transfer heat.
-
Q.91PART-A
A shopkeeper allows a discount of 18% on the marked price of an article and sells it for ₹2,870. Find the marked price of the article.
- ₹3,200
- ₹3,460
- ₹3,500
- ₹3,350
Show answer
Correct answer: option3 — ₹3,500
-
Q.92PART-A
- Cross
- Union
- Tee
- Bend
Show answer
Correct answer: option1 — Cross
-
Q.93PART-A
What should come in place of the question mark (?) in the given alpha-numeric series? Q16, O14, M12, K10, I8, ?
- H6
- G6
- G4
- J6
Show answer
Correct answer: option2 — G6
-
Q.94PART-A
What is the value of 100 g in SI units?
- 1 kg
- 100 kg
- 0.1 kg
- 10 kg
Show answer
Correct answer: option3 — 0.1 kg
-
Q.95PART-A
Three partners, A, B and C, shared the profit in a business in the proportion of 11 : 13 : 16. They invested their capitals for 7 months, 5 months and 12 months, respectively. What was the ratio of their capitals?
- 165 : 273 : 140
- 3 : 5 : 8
- 21 : 35 : 44
- 96 : 135 : 101
Show answer
Correct answer: option1 — 165 : 273 : 140
-
Q.96PART-A
- 800
- 720
- 600
- 750
Show answer
Correct answer: option4 — 750
-
Q.97PART-A
Which of the following keyboard shortcuts on a Windows 10 home screen opens the item's properties?
- Insert + Alt
- Tab + Del
- F2 + Alt
- Alt + Enter
Show answer
Correct answer: option4 — Alt + Enter
-
Q.98PART-A
The speed of a train is 144 km/hr. The distance covered by the train in 12 seconds is:
- 480 m
- 518 m
- 103 m
- 78 m
Show answer
Correct answer: option1 — 480 m
-
Q.99PART-A
- 44.1%
- 45%
- 43.4%
- 44%
Show answer
Correct answer: option1 — 44.1%
-
Q.100PART-A
How is a voltmeter connected in a circuit to measure potential difference?
- In series with the circuit
- Neither in series nor in parallel
- In parallel across the points where potential difference is to be measured
- Directly to the power source only
Show answer
Correct answer: option3 — In parallel across the points where potential difference is to be measured
-
Q.101PART-B
Which component in a thermal relay is responsible for detecting temperature changes?
- Electromagnet
- Transformer
- Resistor
- Bimetallic element
Show answer
Correct answer: option4 — Bimetallic element
-
Q.102PART-B
When should the measurement of electrode resistance be conducted during the installation of an earthing system?
- Only when the earthing system shows signs of malfunction
- At the time of initial design
- After backfilling the earth electrode
- Before backfilling the earth electrode
Show answer
Correct answer: option4 — Before backfilling the earth electrode
-
Q.103PART-B
Increasing which of the following will decrease the inductance of a solenoid?
- Core permeability
- Number of turns
- Length of the coil
- Cross-sectional area
Show answer
Correct answer: option3 — Length of the coil
-
Q.104PART-B
The typical switching speed of GTOs is _____.
- infinity
- very fast
- high
- relatively slow
Show answer
Correct answer: option4 — relatively slow
-
Q.105PART-B
A voltmeter with a resistance of 10,000 ohms is connected across a circuit that has a voltage of 50 V. What is the current flowing through the voltmeter?
- 4 mA
- 1 mA
- 2 mA
- 5 mA
Show answer
Correct answer: option4 — 5 mA
-
Q.106PART-B
The SI unit of temperature is/are _____.
- fahrenheit
- celsius
- kelvin
- both kelvin and celsius
Show answer
Correct answer: option3 — kelvin
-
Q.107PART-B
For which purpose is mineral oil provided in an oil-filled transformer?
- Insulation purpose only
- Cooling purpose only
- Both cooling and insulation purpose
- Prevent moisture
Show answer
Correct answer: option3 — Both cooling and insulation purpose
-
Q.108PART-B
What is the main purpose of the field winding in a DC generator?
- To conduct load current
- To reduce armature reaction
- To produce the required magnetic field
- To convert AC to DC
Show answer
Correct answer: option3 — To produce the required magnetic field
-
Q.109PART-B
Which of the following statements is INCORRECT about end standard?
- Faces are subject to wear.
- It is used to measure the distance between two engraved lines.
- It is slower but more accurate.
- It measures the distance between two parallel flat surfaces.
Show answer
Correct answer: option2 — It is used to measure the distance between two engraved lines.
-
Q.110PART-B
Which of the following information is necessary to construct a rectangle?
- Only the length of one side
- Length of two adjacent sides
- Only the length of the diagonal
- Length of one side and the area of the rectangle
Show answer
Correct answer: option2 — Length of two adjacent sides
-
Q.111PART-B
If inductance (L) is doubled, what happens to inductive reactance?
- It becomes zero.
- It doubles.
- It becomes half.
- It remains the same.
Show answer
Correct answer: option2 — It doubles.
-
Q.112PART-B
Which of the following ‘V’ blocks will have one ‘V’ groove and two grooves (slots) on either side for clamping in two positions?
- Single level double groove ‘V’ block
- Double level single groove ‘V’ block
- Single level single groove ‘V’ block
- Matched pair ‘V’ block
Show answer
Correct answer: option1 — Single level double groove ‘V’ block
-
Q.113PART-B
Which of the following characteristics of a GTO is most important for its use in high- power switching applications?
- Its ability to handle very low currents.
- Its high thermal stability.
- Its fast switching speed.
- Its ability to be turned off by a gate signal.
Show answer
Correct answer: option4 — Its ability to be turned off by a gate signal.
-
Q.114PART-B
Which of the following is the most common application of an Earth Leakage Circuit Breaker (ELCB)?
- Protecting electrical appliances from overload
- Protecting high-voltage transmission lines
- Preventing electrical fires in buildings
- Detecting voltage fluctuations in the system
Show answer
Correct answer: option3 — Preventing electrical fires in buildings
-
Q.115PART-B
In a three-phase system with a line-to-line voltage of 400 V and a line current of 10 A, what is the total real power in Watt, delivered to the load if the power factor is 0.9?
Show answer
Correct answer: option2
-
Q.116PART-B
Which of the following types of chisels is used for separating metals after chain drilling?
- Flat chisel
- Web chisel
- Cross-cut chisel
- Diamond point chisel
Show answer
Correct answer: option2 — Web chisel
-
Q.117PART-B
What is the typical temperature range of a mercury-based clinical thermometer?
- 35°C to 42°C
- 0°C to 50°C
- −10°C to 110°C
- 0°C to 100°C
Show answer
Correct answer: option1 — 35°C to 42°C
-
Q.118PART-B
Apart from lamp holders, where else is a cord grip or underwriter’s knot used?
- Earthing systems
- Pull switches
- High-voltage substations
- Circuit breaker panels
Show answer
Correct answer: option2 — Pull switches
-
Q.119PART-B
Find the lateral surface area of a cube with side length 5 cm.
- 125 cm²
- 200 cm²
- 100 cm²
- 150 cm²
Show answer
Correct answer: option3 — 100 cm²
-
Q.120PART-B
In electrodynamometer type synchroscope, moving coil is connected:
- in parallel with capacitor across terminals of incoming machines
- in series with inductance across two phases of busbar
- between two pressure coils
- in series with resistance across busbars
Show answer
Correct answer: option3 — between two pressure coils
-
Q.121PART-B
The gate current in an ideal FET is _________.
- zero
- equal to the drain current
- very high
- proportional to the source current
Show answer
Correct answer: option1 — zero
-
Q.122PART-B
What is the main reason for using a snubber circuit in IGBT-based circuits?
- To reduce the gate charge
- To protect the IGBT from voltage spikes during switching
- To minimise the switching losses
- To increase the switching speed
Show answer
Correct answer: option2 — To protect the IGBT from voltage spikes during switching
-
Q.123PART-B
For a DC motor installation with explosion-proof certification, which standard must be followed for enclosure and wiring compliance?
- ISO 9001
- ANSI C84.1
- NFPA 70
- IEC 60034-1
Show answer
Correct answer: option4 — IEC 60034-1
-
Q.124PART-B
The wave set of hacksaw teeth set has a pitch of ________________.
- 1.0 mm
- 0.8 mm
- 2.0 mm
- 0.5 mm
Show answer
Correct answer: option2 — 0.8 mm
-
Q.125PART-B
Transformer is a _______.
- synchronous motor as a rotating transformer
- static device
- moving device
- rotating device
Show answer
Correct answer: option2 — static device
-
Q.126PART-B
According to IEEE 80, the resistance of the ground system should be _______.
- equal to the system’s total load current
- moderate to prevent excessive current flow
- low enough to allow fault currents to safely dissipate into the earth
- as high as possible to ensure efficient operation
Show answer
Correct answer: option3 — low enough to allow fault currents to safely dissipate into the earth
-
Q.127PART-B
Which of the following terms in the 5S concept refers to making a habit of maintaining the established procedures?
- Sort
- Set
- Sustain
- Shine
Show answer
Correct answer: option3 — Sustain
-
Q.128PART-B
Which of the following calipers are used for marking lines, parallel to inside and outside edges and for locating the centre of round bars?
- Simple calipers
- Leg and point calipers
- Firm joint calipers
- Spring joint calipers
Show answer
Correct answer: option2 — Leg and point calipers
-
Q.129PART-B
Which of the following statements about earth resistance in context of earthing is true?
- Higher earth resistance increases the effectiveness of grounding.
- Lower earth resistance improves the performance of an electrical system.
- Earth resistance only affects power transmission efficiency.
- Earth resistance does not affect electrical safety.
Show answer
Correct answer: option2 — Lower earth resistance improves the performance of an electrical system.
-
Q.130PART-B
Which DC motor is preferred in steel rolling mills and elevators?
- DC Shunt Motor
- DC Series Motor
- Permanent Magnet DC Motor
- Cumulative Compound Motor
Show answer
Correct answer: option4 — Cumulative Compound Motor
-
Q.131PART-B
The key feature of an IGBT is that it combines the characteristics of _____.
- a transistor and an amplifier
- a BJT and a MOSFET
- a diode and a capacitor
- a diode and a transistor
Show answer
Correct answer: option2 — a BJT and a MOSFET
-
Q.132PART-B
Toroidal inductors are shaped like a:
- cylinder
- ring
- cone
- cube
Show answer
Correct answer: option2 — ring
-
Q.133PART-B
If a DC motor fails to start, what should be checked first?
- Motor shaft alignment
- Commutator polishing
- Field winding resistance
- Power supply connections and voltage
Show answer
Correct answer: option4 — Power supply connections and voltage
-
Q.134PART-B
Who is authorised to conduct road tests on workshop vehicles?
- Any employee
- The company accountant
- Visitors to the workshop
- Only trained and certified personnel
Show answer
Correct answer: option4 — Only trained and certified personnel
-
Q.135PART-B
According to Faraday’s law, the magnitude of induced EMF in a DC generator depends on the _______.
- resistance of the conductor
- rate of change of magnetic flux
- material of the conductor
- length of the conductor only
Show answer
Correct answer: option2 — rate of change of magnetic flux
-
Q.136PART-B
The insulation resistance of any wiring installation should NOT be less than _____ for operating voltage 1000 volt.
- 1 mega ohm
- 100 ohm
- 1 kilo ohm
- 10 ohm
Show answer
Correct answer: option1 — 1 mega ohm
-
Q.137PART-B
What may happen if a flexible cable in a pendant lamp is not secured with a cord grip or underwriter’s knot?
- The ceiling will overheat.
- The lamp will consume more power.
- The cable connection may come out, leading to a shock hazard.
- The lamp will emit dim light.
Show answer
Correct answer: option3 — The cable connection may come out, leading to a shock hazard.
-
Q.138PART-B
What is the SI unit of 'volume'?
- Litres
- Cubic centimetre
- Millilitres
- Cubic metre
Show answer
Correct answer: option4 — Cubic metre
-
Q.139PART-B
If the length of a resistor is doubled, what happens to its resistance, assuming all other factors remain constant?
- The resistance is doubled.
- The resistance is halved.
- The resistance quadruples.
- The resistance remains the same.
Show answer
Correct answer: option1 — The resistance is doubled.
-
Q.140PART-B
What is NOT an advantage of using plate earthing over other types of earthing?
- Requires less maintenance
- More suitable for high-voltage systems
- Low installation cost
- Provides low resistance in high-resistivity soil
Show answer
Correct answer: option2 — More suitable for high-voltage systems
-
Q.141PART-B
Which of the following colours is commonly used for caution signs?
- Yellow
- Green
- Blue
- Red
Show answer
Correct answer: option1 — Yellow
-
Q.142PART-B
Which of the following statements about title block is/are true? Statement 1: The title block is situated in the bottom right-hand corner of the drawing sheet. Statement 2: The contents of the title block are standardised and cannot be modified to suit individual company needs.
- Both statements are false
- Both statements are true
- Statement 1 is false, but statement 2 is true
- Statement 1 is true, but statement 2 is false
Show answer
Correct answer: option4 — Statement 1 is true, but statement 2 is false
-
Q.143PART-B
In a logic circuit, two inputs A and B are applied to an AND gate, and the output of the AND gate is connected to the input of a NOT gate. If the inputs A and B are both at logic 0, what will be the output of the entire circuit?
- 1
- 0
- Undefined
- 2
Show answer
Correct answer: option1 — 1
-
Q.144PART-B
When creating 10 mm single-stroke capital letters in vertical style, what does the 10 mm distance between horizontal parallel lines represent?
- Interline spacing
- Stroke thickness
- Letter height
- Letter width
Show answer
Correct answer: option3 — Letter height
-
Q.145PART-B
How does an Earth Leakage Circuit Breaker (ELCB) work in an electrical system?
- It monitors the voltage drop in the system.
- It regulates the current flowing to the earth electrode.
- It detects high current flow and trips to prevent overloads.
- It compares the incoming and outgoing currents to detect imbalance, indicating leakage to earth.
Show answer
Correct answer: option4 — It compares the incoming and outgoing currents to detect imbalance, indicating leakage to earth.
-
Q.146PART-B
Rotating field type alternator is generally used for rating of up to _______.
- 1000 MVA
- 100 kVA
- 250 KVA
- 1000 VA
Show answer
Correct answer: option1 — 1000 MVA
-
Q.147PART-B
Convert 8.5% into a decimal.
- 0.85
- 85
- 0.085
- 8.5
Show answer
Correct answer: option3 — 0.085
-
Q.148PART-B
Which of the following statements is NOT correct for using scribers?
- Place a cork on the point when in use to prevent accidents.
- Do not put the scriber in your pocket.
- While scribing lines, the scriber is used like a pencil.
- Scriber points are very sharp, so they are to be handled very carefully.
Show answer
Correct answer: option1 — Place a cork on the point when in use to prevent accidents.
-
Q.149PART-B
Which of the following switch types is required along with an intermediate switch to control a lamp from three or more positions?
- Push-button switches
- One-way switches
- Dimmer switches
- Two-way switches
Show answer
Correct answer: option4 — Two-way switches
-
Q.150PART-B
What is the minimum age for employment in factories or mines or other hazardous employment, according to Article 24 of the Indian Constitution?
- 14 years
- 16 years
- 18 years
- 12 years
Show answer
Correct answer: option1 — 14 years
-
Q.151PART-B
Which of the following best describes the working of a TRIAC?
- It is a device used to store energy.
- It is a voltage-controlled device.
- It switches both AC and DC currents.
- It is a current-controlled device.
Show answer
Correct answer: option4 — It is a current-controlled device.
-
Q.152PART-B
A 100-mm prick punch with a 7-mm diameter body could have a 2.5-mm diameter point ground to an angle of __________.
- 45°
- 90°
- 30°
- 120°
Show answer
Correct answer: option3 — 30°
-
Q.153PART-B
What is the formula for the total capacitance of capacitors connected in parallel?
Show answer
Correct answer: option2
-
Q.154PART-B
What does the term 'Ferreed' in Ferreed relay stand for?
- A type of current sensing relay
- A voltage stabiliser component
- A combination of ferrite and reed switch
- A thermally operated relay
Show answer
Correct answer: option3 — A combination of ferrite and reed switch
-
Q.155PART-B
Which of the following conditions is NOT required for parallel operation of alternator?
- They may have different frequency.
- Alternator should be of the same type.
- Prime movers of alternator should have the same speed load characteristics.
- They may have the same output voltage rating.
Show answer
Correct answer: option1 — They may have different frequency.
-
Q.156PART-B
The function of slots on stator is to:
- excite the field system
- provide effective cooling
- house the armature conductors
- strengthen the core
Show answer
Correct answer: option3 — house the armature conductors
-
Q.157PART-B
Match the following types of lines with their correct descriptions according to their orientation and characteristics. Description A. A line that is neither parallel to a horizontal plane nor perpendicular to it. B. A line that is perpendicular to horizontal lines. C. A line that changes its direction continuously. D. A line that is parallel to a horizontal plane.
- A - 2, B - 1, C - 4, D - 3
- A - 1, B - 2, C - 3, D - 4
- A - 3, B - 2, C - 4, D - 1
- A - 2, B - 3, C - 4, D - 1
Show answer
Correct answer: option3 — A - 3, B - 2, C - 4, D - 1
-
Q.158PART-B
- 10 Ω
- 6 Ω
- 8 Ω
- 4 Ω
Show answer
Correct answer: option2 — 6 Ω
-
Q.159PART-B
Which of the following is the primary reason why copper is widely used as a conductor in electrical wiring?
- Copper has low resistance and high conductivity.
- Copper is abundant and inexpensive.
- Copper has high resistance to electricity.
- Copper has a low melting point.
Show answer
Correct answer: option1 — Copper has low resistance and high conductivity.
-
Q.160PART-B
In an ideal transformer, the primary and secondary windings resistance is:
- 1000 ohm
- 0 ohm
- 100 ohm
- 1000000 ohm
Show answer
Correct answer: option2 — 0 ohm
-
Q.161PART-B
Which component(s) is/are required to obtain a proportional DC voltage for a voltage sensing relay?
- Capacitor and diode
- Transformer and rectifier
- Resistor and inductor
- Motor and generator
Show answer
Correct answer: option2 — Transformer and rectifier
-
Q.162PART-B
Which type of line is used to represent hidden edges or surfaces in a technical drawing, as per BIS SP 46-2003?
- Chain thin line
- Continuous thick line
- Dashed thin line
- Continuous thin line
Show answer
Correct answer: option3 — Dashed thin line
-
Q.163PART-B
- To intersect line AC
- To intersect above A
- To find midpoint AB
- To mark equal lengths
Show answer
Correct answer: option2 — To intersect above A
-
Q.164PART-B
In a long-shunt compound DC generator, the shunt field winding is connected _______.
- in series with the armature
- in parallel with both armature and series field winding
- only to the load
- between the series field and load
Show answer
Correct answer: option2 — in parallel with both armature and series field winding
-
Q.165PART-B
In a three-phase system, if the phase current is 20 A in a delta connection, what is the line current?
- 10 A
- 20 A
Show answer
Correct answer: option3
-
Q.166PART-B
For your safety at work, which of the following should be ensured? 1. All the required protective clothing and equipment are used. 2. Training and instruction necessary for performing tasks safely have been received.
- Neither statement 1 nor 2
- Both statements 1 and 2
- Only statement 2
- Only statement 1
Show answer
Correct answer: option2 — Both statements 1 and 2
-
Q.167PART-B
In a series circuit, three resistors of 10 ohms, 20 ohms, and R ohms are connected in series with a 12 V battery. What is the value of resistance R if current flowing in the circuit is 0.2 A?
- 10 ohms
- 40 ohms
- 30 ohms
- 20 ohms
Show answer
Correct answer: option3 — 30 ohms
-
Q.168PART-B
Select the INCORRECT statement with regards to a three-phase star-connected AC circuit.
- The line voltage is the voltage between any two line of the circuit.
- The phase voltage is the voltage between the neutral point and any phase of the circuit.
- The line voltage is higher than the phase voltage.
- The phase voltage is higher than the line voltage.
Show answer
Correct answer: option4 — The phase voltage is higher than the line voltage.
-
Q.169PART-B
In a four-band resistor, what does the third band represent?
- Multiplier
- First significant digit
- Tolerance
- Second significant digit
Show answer
Correct answer: option1 — Multiplier
-
Q.170PART-B
Which parameters of two identical transformers are determined using Back-to-back test?
- Friction loss and resistance
- Efficiency and voltage regulation
- Friction loss and inductance
- Mechanical loss and inductance
Show answer
Correct answer: option2 — Efficiency and voltage regulation
-
Q.171PART-B
If 50 W of power is applied to the primary of an ideal transformer with a turns ratio of 10, the power delivered to the secondary load is:
- 500 W
- 100 W
- 50 W
- 5 W
Show answer
Correct answer: option3 — 50 W
-
Q.172PART-B
Consider the following statements for a three phase AC circuit. Statement 1: In a balanced three-phase system, the line current is always equal to the phase current in a star-connected load. Statement 2: In a delta-connected system, the phase voltage is equal to the line voltage. Select the correct option based on above statements.
- Statement 1 is true, and Statement 2 is false.
- Statement 1 is false, and Statement 2 is true.
- Both Statement 1 and Statement 2 are false.
- Both Statement 1 and Statement 2 are true.
Show answer
Correct answer: option4 — Both Statement 1 and Statement 2 are true.
-
Q.173PART-B
In a balanced three-phase system, the power delivered by the system depends on ____________.
- phase voltage only
- phase voltage, phase current and power factor
- phase current only
- power factor only
Show answer
Correct answer: option2 — phase voltage, phase current and power factor
-
Q.174PART-B
When passing stationary vehicles, keep a watch on ___________ who may come out suddenly from the front of the stationary vehicle. While overtaking, it should be done on the __________ side. Always keep a good _________________ between your vehicle and others.
- pedestrians; right; distance
- cyclists; left; interval
- vehicles; right; gap
- drivers; left; space
Show answer
Correct answer: option1 — pedestrians; right; distance
-
Q.175PART-B
Which of the following metals has the lowest melting point?
- Iron
- Gold
- Lead
- Mercury
Show answer
Correct answer: option4 — Mercury
Option number of the correct answer for each question.